RELIANCE 57C430控制器模塊
1.產 品 資 料 介 紹：
中文資料：
RELIANCE 57C430控制器模塊的產品特點可以歸納如下：
- 高性能與穩定性：
- 該模塊采用了先進的控制技術和材料，確保了其在復雜工業環境中能夠提供持久且穩定的工作性能。
- 支持通用軟件語言，如AutoMate編程系統軟件，可用于編程任何AutoMate控制器，提供了高度的靈活性和兼容性。
- 通信與網絡功能：
- 所有AutoMate處理器都支持R-Net通信，允許多達32個站點的點對點工業網絡或節點連接在同一根同軸電纜上。
- R-Net還支持計算機或其他設備與AutoMate通信控制器通過串行網關和計算機總線卡，實現800KBaud的全速數據傳輸。
- 系統要求與兼容性：
- 系統需要有256k奇偶校驗RAM和8mHZ的CPU速度，以滿足該模塊的運行需求。
- 可以根據機架的大小，選擇安裝一個或多個處理器模塊（最多可在同一機架上安裝四個）。
- 接口與通信端口：
- 57C430具有兩個RS-232母通信端口，一個標記為PORT A，另一個標記為PROGRAMMER/PORT B，方便與其他設備和系統連接。
- 狀態指示與錯誤檢測：
- 配備兩個LED標記為FAULT CODE，用于指示可能的故障。
- 還有兩個7段錯誤代碼指示器，分別標記為1st和2nd，用于更詳細地顯示可能的錯誤代碼。
- 電池狀態監測：
- 兩個LED標記為BAT.OK和OK，用于指示RAM備用電池的狀態。如果電池已耗盡，BAT.OK指示燈將停止發光。
- 易于安裝與編程：
- 設計為AutoMax 6010處理器模塊，旨在安裝到AutoMax機架上，易于安裝和配置。
- 使用AutoMate 40E中的說明進行編程，無需計算機專業知識即可輕松上手。
- 不再獲得原始公司支持：
- 需要注意的是，該模塊可能不再獲得原始公司的任何支持，因此在購買和使用時需要考慮到這一點。
- 多應用場景：
- 適用于多種工業自動化和控制場景，如生產線控制、機械設備控制、溫度控制系統和液位控制系統等。
綜上所述，RELIANCE 57C430控制器模塊以其高性能、穩定的通信與網絡功能、靈活的系統要求和兼容性、多樣的接口與通信端口、詳細的錯誤檢測與狀態指示、方便的安裝與編程等特點，成為工業自動化和控制領域的一款可靠選擇。
英文資料
The product features of RELIANCE 57C430 controller module can be summarized as follows:
High performance and stability:
This module adopts advanced control technology and materials, ensuring that it can provide long-lasting and stable working performance in complex industrial environments.
Supports universal software languages, such as AutoMate programming system software, which can be used to program any AutoMate controller, providing high flexibility and compatibility.
Communication and network functions:
All AutoMate processors support R-Net communication, allowing up to 32 point-to-point industrial networks or nodes to be connected on the same coaxial cable.
R-Net also supports communication between computers or other devices and AutoMate controllers through serial gateways and computer bus cards, achieving full speed data transmission of 800KBaud.
System requirements and compatibility:
The system requires 256k parity RAM and 8mHz CPU speed to meet the operational requirements of the module.
You can choose to install one or more processor modules based on the size of the rack (up to four can be installed in the same rack).
Interface and communication ports:
57C430 has two RS-232 female communication ports, one labeled as PORT A and the other labeled as PROMMER/PORT B, for easy connection with other devices and systems.
Status indication and error detection:
Equipped with two LED markers labeled as FAIL CODE to indicate possible faults.
There are also two 7-segment error code indicators, labeled 1st and 2nd, used to display possible error codes in more detail.
Battery status monitoring:
Two LEDs are marked as BAT.OK and OK to indicate the status of the RAM backup battery. If the battery is depleted, the BAT.OK indicator light will stop emitting light.
Easy to install and program:
Designed as an AutoMax 6010 processor module, designed to be installed on an AutoMax rack for easy installation and configuration.
Using the instructions in AutoMate 40E for programming makes it easy to get started without the need for computer expertise.
No longer receiving support from the original company:
It should be noted that this module may no longer receive any support from the original company, so this needs to be taken into consideration when purchasing and using it.
Multiple application scenarios:
Suitable for various industrial automation and control scenarios, such as production line control, mechanical equipment control, temperature control systems, and liquid level control systems.
In summary, the RELIANCE 57C430 controller module has become a reliable choice in the field of industrial automation and control due to its high performance, stable communication and network functions, flexible system requirements and compatibility, diverse interfaces and communication ports, detailed error detection and status indication, convenient installation and programming, and other characteristics.
2.產 品 展 示
3.產 品 展 示
HONEYWELL 05704-A-0146 DIGITAL
PROSOFT MVI46-MCM COMMUNICATIO
KOLLMORGEN CP310250 伺服驅動器
| PMB33F-20201-03 | DT 370A | R23GENA-R1-NS-VS-01 |
| PMB33F-20101-00 | DT 371A | R43HCNA-NP-RW-VS-03 |
| PMB33F-10216-03 | GJR2 242100 R1 | R45GCNA-TS-NS-NV-00 |
| PMB33F-20201-02 | ABB DSAO120A 3BSE018293R1 | R35KMNC-TS-RC-NV-02 |
| R46GSNA-R2-NS-VS-04 | R32HSNC-TS-NS-NV-02 | R22GENT-TS-NS-NV-02 |
| R65HENA-TS-NS-NV-00 | R43HCBA-R2-NS-VS-00 | R35GENH-R2-NS-NV-00 |
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:HTTP://qing-ting.cn