SR745-W2-P5-G5-HI-A繼電保護器,GE配置教程
特殊重啟模式。請參閱特定正確模式的診斷。2.PPCBug上不提供標有星號（*）的測試集3.1及更早版本。概述您可以使用工廠安裝的調試監視器PPCBug來修改PowerPC板非易失性RAM中包含的某些參數（NVRAM），也稱為電池備份RAM（BBRAM）。? NVRAM中的板信息塊包含各種與硬件操作參數有關的元素。使用PPCBug命令CNFG更改這些參數。
SR745-W2-P5-G5-HI-A繼電保護器? 使用PPCBug命令ENV更改可配置的PPCBugNVRAM中的參數。CNFG和ENV命令均在PPCBug中描述附錄D中列出的固件包用戶手冊，相關文檔請參閱該手冊，了解其使用和功能。以下段落提供了有關CNFG和特定于PPCBug調試器的ENV以及參數可以使用ENV命令配置。CNFG–配置電路板信息塊使用此命令顯示和配置電路板信息塊，它位于NVRAM內。電路板信息塊包含各種元素，詳細說明了PowerPC板。PowerPC板的板結構如所示MVME2600的以下示例：引用的參數是左對齊字符（ASCII）字符串用空格字符填充，并顯示引號（“）以指示字符串的大小。未引用的參數被視為數據字符串和數據字符串右對齊。填充數據字符串如果不滿足長度，則使用零。電路板信息塊在出廠前已配置。無需修改塊參數，除非NVRAM已損壞。請參閱附錄D中列出的程序員參考指南，有關實際位置和其他信息的相關文件關于電路板信息塊。有關說明，請參閱PPCBug固件包用戶手冊CNFG和示例。ENV–設置環境使用ENV命令以交互方式查看和/或配置所有PPCBug保存在非易失性RAM（NVRAM）中的操作參數。有關說明，請參閱PPCBug固件包用戶手冊ENV的使用。宇宙中寄存器的附加信息影響這些參數的ASIC包含在PowerPC板中程序員參考指南。下面列出并描述了您可以配置的參數使用環境。顯示的默認值是在以下情況下生效的值：出版物已付印。配置PPCBug參數可以使用ENV配置的參數包括：錯誤或系統環境[B/S]=B？現場服務菜單啟用[是/否]=否？B Bug是指沒有系統類型支持的模式顯示。然而，與系統相關的項目仍然是可獲得的（默認）S系統是標準操作模式，是如果NVRAM出現故障，則為默認模式。系統模式為在PPCBug固件包用戶手冊中定義手冊顯示現場服務菜單。N不顯示現場服務菜單。（默認）
. Some diagnostics depend on restart defaults that are set up only in a
particular restart mode. Refer to the documentation on a particular
diagnostic for the correct mode.
2. Test Sets marked with an asterisk (*) are not available on PPCBug
release 3.1 and earlier.Overview
You can use the factory-installed debug monitor, PPCBug, to modify
certain parameters contained in the PowerPC board’s Non-Volatile RAM
(NVRAM), also known as Battery Backed-up RAM (BBRAM).
? The Board Information Block in NVRAM contains various
elements concerning operating parameters of the hardware. Use the
PPCBug command CNFG to change those parameters.
? Use the PPCBug command ENV to change configurable PPCBug
parameters in NVRAM.
The CNFG and ENV commands are both described in the PPCBug
Firmware Package User’s Manual, listed in Appendix D, Related
Documentation. Refer to that manual for general information about their
use and capabilities.
The following paragraphs present additional information about CNFG and
ENV that is specific to the PPCBug debugger, along with the parameters
that can be configured with the ENV command.CNFG – Configure Board Information Block
Use this command to display and configure the Board Information Block,
which is resident within the NVRAM. The board information block
contains various elements detailing specific operational parameters of the
PowerPC board. The board structure for the PowerPC board is as shown in
the following example for an MVME2600:
The parameters that are quoted are left-justified character (ASCII) strings
padded with space characters, and the quotes (") are displayed to indicate
the size of the string. Parameters that are not quoted are considered data
strings, and data strings are right-justified. The data strings are padded
with zeroes if the length is not met.
The Board Information Block is factory-configured before shipment.
There is no need to modify block parameters unless the NVRAM is
corrupted.
Refer to the Programmer’s Reference Guide, listed in Appendix D,
Related Documentation, for the actual location and other information
about the Board Information Block.
Refer to the PPCBug Firmware Package User's Manual for a description
of CNFG and examples.ENV – Set Environment
Use the ENV command to view and/or configure interactively all PPCBug
operational parameters that are kept in Non-Volatile RAM (NVRAM).
Refer to the PPCBug Firmware Package User’s Manual for a description
of the use of ENV. Additional information on registers in the Universe
ASIC that affect these parameters is contained in your PowerPC board
programmer’s reference guide.
Listed and described below are the parameters that you can configure
using ENV. The default values shown were those in effect when this
publication went to print.
Configuring the PPCBug Parameters
The parameters that can be configured using ENV are:
Bug or System environment [B/S] = B?
Field Service Menu Enable [Y/N] = N?
B Bug is the mode where no system type of support is
displayed. However, system-related items are still
available. (Default)
S System is the standard mode of operation, and is the
default mode if NVRAM should fail. System mode is
defined in the PPCBug Firmware Package User’s
Manual.
Y Display the field service menu.
N Do not display the field service menu. (Default)
