主營產品
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
EPRO 9200-00006N前置器
硬件?微處理器日立H8/3002
?HT 401：256k閃存，128k SRAMHT 402:512k閃存，128k SRAM
?由軟件配置的接口：串行接口1:*RS-232-C（無硬件握手），
*20 mA電流回路（發射器和接收器可以使用配置為主動或被動DIP開關）
串行接口2:*RS-232-C（無硬件握手），（可選）*20 mA電流回路（發射器和接收器可以配置為主動或被動）
*RS-422-A/RS-485傳輸速率敢達38400波特總線耦合*INTERBUS
（可選）*CAN*西門子S7 MPI*PROFIBUS-DP
?電源的光學隔離
?所有信號和電壓均連接至連接板。安全預防措施
在任何情況下都必須嚴格遵守本手冊中的說明
不這樣做可能會導致潛在危險源的產生，或使安全功能集成在手持終端中。
除本手冊中給出的安全說明外，安全預防措施和事故還必須遵守適合有關情況的預防措施。
? 必須采取措施，以確保在功率下降或電源故障時，中斷的程序可以正確重新啟動。這樣情況下，不得出現危險的操作條件即使是暫時的。
? 在自動化系統上發生故障的所有情況下造成人身傷害或機械和設備嚴重?fù)p壞，
必須采取額外的外部安全措施，以確保：系統作為一個整體，即使在故障事件。
? 安全相關部件的功能（急停和啟用開關）必須定期測試。
? 此外，在設備受到強烈沖擊（例如，設備墜落到地面）后必須測試安全相關部件的功能。
2.1電源該裝置符合EN61131-2的安全等級III，并且EN50178.必須保證設備的24V電源
通過安全隔離低壓電路和危險接觸電壓電路（例如通過安全變壓器或類似設施）。
Hardware
? Microprocessor Hitachi H8/3002
? HT 401: 256k FLASH memory, 128k SRAM
HT 402: 512k FLASH memory, 128k SRAM
? Interfaces, to be configured by the software:
Serial interface 1: * RS-232-C (without hardware handshake),
* 20 mA Current Loop (transmitter and receiver
can be configured active or passive using the
DIP switches)
Serial interface 2: * RS-232-C (without hardware handshake),
(Option) * 20 mA Current Loop (transmitter and receiver
can be configured active or passive)
* RS-422-A / RS-485
Transmission rate up to 38400 Baud
Bus coupling * INTERBUS
(Option) * CAN
* Siemens S7 MPI
* PROFIBUS-DP
? Optical isolation of power supply
? All signals and voltages are connected to the connection board.Safety Precautions
The instructions contained in this manual must be precisely followed in all circumstances.
Failure to do so could result in the creation of potential sources of danger or the disabling of
safety features integrated in the handheld terminal.
Apart from the safety instructions given in this manual, the safety precautions and accident
prevention measures appropriate to the situation in question must also be observed.
? Measures must be taken to ensure that in the event of power dips or
power failures, an interrupted program can be properly restarted. In such
situations, no dangerous operating conditions must be allowed to occur
even temporarily.
? In all situations where faults occurring on the automation system could
cause personal injury or significant damage to machinery and equipment,
additional external safety measures must be taken in order to ensure the
system as a whole remains in a safe operating condition even in the
event of a fault.
? The functionality of safety-related parts (E-stop and enabling switches)
must be tested regularly.
? Also after strong shocks (e.g. device falls to ground) of the device, the
functionality of safety-relevant parts must be tested.
2.1 Power Supply
The device meets the safety class III in accordance with EN61131-2 and
EN50178. The 24V power supply for the equipment must be guaranteed
through safe isolation of the low-voltage circuits from dangerous-contact
voltage circuits (e.g. by safety transformers or similar facilities).
