UNITROL 1020控制處理器
系統狀態參考
系列90-70 PLC CPU的%S內存區域中的特定參考。有些人已分配給FIP使用。
傳輸時隙FIP網絡上COMV的每個MPS交換在一個時隙中進行。這個時隙可以是異步的或同步的。
傳輸時隙對應于具有周期性和相位的時隙范圍相對于總線仲裁器周期的開始。在傳輸時隙中，一組通信車輛通過網絡傳輸。傳輸時隙由網絡配置工具。
TVA傳輸變量。TVA是兩個用戶之間的交換單位。COMV
包含一個或多個TVA。TVA從未被劃分為多個COMV。TVA通常包含由支持的應用程序操作的變量表設備。本附錄中的表格列出了COMREQ狀態中報告的狀態代碼
COMREQ函數執行后的字。這些代碼也可能出現在Word中1個詳細的信道狀態字。
狀態代碼是一個單字，包含低字節的主代碼和次代碼在高字節中。次要狀態代碼的含義取決于相關的主要狀態代碼。
狀態代碼分為下表：主要狀態代碼
次要狀態代碼主要狀態代碼05H的次要狀態代碼（遠程服務器PLC處）和
85H（在客戶PLC處）主要狀態代碼11H的次要狀態代碼（遠程服務器PLC處）
主要狀態代碼14H的次要狀態代碼（在客戶PLC處）
主要狀態代碼90H的次要狀態代碼（在客戶端PLC），單槽CPU，帶三個串行端口
在中提供6 MB電池備份內存
同一個槽包含256K非易失性用戶閃存支持7.92及更高版本中的BMA
支持浮點計算12K輸入和輸出（任意混合），最高8K模擬輸入/輸出每個布爾函數0.4微秒96 MHz，80486DX4微處理器支持IC66（可以是IC660或IC661）和IC697 I/O
由MS-DOS軟件產品編程，或在上運行的基于Windows的軟件產品
基于以太網的Windows 95或Windows NTTCP/IP或通過SNP端口
可配置數據和程序存儲器電池供電日歷時鐘三位操作模式開關密碼控制訪問遠程編程器按鍵開關
內存保護七個狀態LED
軟件配置（無DIP開關或跳線）
前門內的參考信息系統內可升級固件
System Status References
Specific references in the %S memory area of the Series 90-70 PLC CPU. Some have
been assigned for FIP use.
Transport Time Slot
Each MPS exchange of a COMV on the FIP network is carried out in a time slot. The
time slot may be either asynchronous or synchronous.
A transport time slot corresponds to a time slot range which is periodic and phased
in relation to the beginning of the Bus Arbiter cycle. In a transport time slot, a set of
COMVs is transported by the network. Transport time slots are set up by the
Network Configuration Tool.
TVA
Transport Variable. A TVA is the unit of exchange between two subscribers. A COMV
contains 1 or more TVAs. A TVA is never divided into multiple COMVs. A TVA
generally carries a table of variables manipulated by the applications supported by
the devices.The tables in this appendix list the status codes that are reported in the COMREQ Status
word after the execution of a COMREQ function. These codes also may appear in Word
1 of the Detailed Channel Status words.
Status Codes are a single word containing a major code in the low byte and a minor code
in the high byte. The meaning of a Minor Status Code depends upon the associated Major Status Code.
Status Codes are grouped into the following tables:
Major Status Codes
Minor Status Codes
Minor Status Codes for Major Status Codes 05H (at Remote Server PLC) and
85H (at Client PLC)
Minor Status Codes for Major Status Code 11H (at Remote Server PLC)
Minor Status Codes for Major Status Code 14H (at Client PLC)
Minor Status Codes for Major Status Code 90H (at Client PLC) Single slot CPU with three serial ports
Provides 6 Mbytes of battery-backed memory in
the same slot
Contains 256K of non-volatile user flash memory
Supports BMA in release 7.92 and later
Supports floating point calculations
12K inputs and outputs (any mix), and up to 8K
analog I/O
0.4 microseconds per boolean function
96 MHz, 80486DX4 microprocessor
Supports IC66 (can be IC660 or IC661) and IC697 I/O
Programmed by MS-DOS software products, or
Windows based software products running on
Windows 95 or Windows NT over Ethernet
TCP/IP or through an SNP port
Configurable data and program memory
Battery-backed calendar clock
Three position operation mode switch
Password controlled access
Remote programmer keyswitch
memory protection
Seven status LEDs
Software configuration (No DIP switches
or jumpers)
Reference information inside front door
In-system upgradable firmware
