3BHL000391P0101可控硅IGCT模塊
在將新終端放入之前，請仔細閱讀這些說明活動
插入端子前，確保端子上的電壓標簽與本地電源電壓匹配。如果不是這樣，不要在任何情況下連接終端。
盡管IND780結構堅固，但它仍然是精確的儀器在搬運和安裝術語“操作環境”時要小心
選擇位置時：?選擇穩定、無振動的表面?確保溫度無過度波動，且無直接影響陽光照射
?避免氣流（例如，風扇或空調）
?地理位置發生任何重大變化后，重新調整（校準）終端位置
溫濕度IND780可在以下溫度和相對濕度條件下運行：在HTtable 1-1的操作環境下列出。終端可存儲在
溫度范圍為-40°至60°C（-40°至140°F），相對濕度，不冷凝。
環境保護嚴苛外殼符合IP69K要求
。面板安裝前面板密封提供與IP65等級相當?shù)?型和12型保護。危險區域
并非所有版本的IND780都可在危險區域運行根據國家電氣規范（NEC），由于易燃或易爆這些地區的大氣。聯系授權梅特勒·托萊多危險應用信息代表。安全處置要求符合關于廢物的歐洲指令2002/96/EC
電氣和電子設備（WEEE）：本設備可能不在生活垃圾中處理。這也適用于外部國家歐盟，根據其具體要求。請按照當?shù)胤ㄒ?guī)處置本產品，網址為：為電氣和電子設備指定的收集點。
如果您有任何問題，請聯系負責部門或您購買此設備的分銷商。
該設備是否應傳遞給其他方（私人或?qū)I(yè)使用），本法規的內容也必須相關。
感謝您對環境保護的貢獻。
Please read these instructions carefully before putting the new terminal into
operation.
Before plugging in the terminal, make sure that the voltage stated on the terminal's
label matches the local power supply voltage. If this is not the case, do not
connect the terminal under any circumstances.
Although the IND780 is ruggedly constructed, it is nevertheless a precision
instrument. Use care in handling and installing the term Operating Environment
When selecting a location:
? Choose a stable, vibration-free surface
? Ensure there are no excessive fluctuations in temperature and no direct
exposure to sunlight
? Avoid drafts (for example, from fans or air conditioning)
? Readjust (calibrate) the terminal after any major change of geographical
position
Temperature and Humidity
The IND780 can be operated at temperatures and relative humidity conditions as
listed under Operating Environment in HTable 1-1. The terminal can be stored at
temperatures ranging from –40° to 60° C (–40° to 140° F) at 10 to 95% relative
humidity, non-condensing.
Environmental Protection
The harsh enclosure meets IP69K requirements. The Panel Mount front panel
sealing provides type 4 and type 12 protection—comparable to IP65 rating.
Hazardous Areas
Not all versions of the IND780 can be operated in areas classified as Hazardous
by the National Electrical Code (NEC) because of the combustible or explosive
atmospheres in those areas. Contact an authorized METTLER TOLEDO
representative for information about hazardous applications. Safe Disposal Requirement
In conformance with the European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE) this device may not be
disposed of in domestic waste. This also applies to countries outside
the EU, per their specific requirements.
Please dispose of this product in accordance with local regulations at
the collecting point specified for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or
the distributor from which you purchased this device.
Should this device be passed on to other parties (for private or
professional use), the content of this regulation must also be related.
Thank you for your contribution to environmental protection.
