公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
產品詳情介紹
FPR3346501R1012模擬遠程配件
選項為是（默認）和否。選擇是將導致系統清除擴展系統配置數據（ESCD）區域，將重置即插即用將新設備添加到系統或BIOS升級。清除數據后，此字段自動切換為否。此ESCD每次BIOS更改、保存和退出，因此，如果要清除數據而不更改其他BIOS設置。大型磁盤有1024多個柱面、16個磁頭或63個扇區每個軌道。如果您的系統基于DOS（DOS或Windows OS），請選擇DOS（默認）；
如果您有其他操作系統（如Unix、Novell Netware等），請選擇“其他”。如果你是如果安裝新軟件或驅動器失敗，請更改此字段選擇，然后嘗試重新安裝軟件。不同的系統需要不同的驅動器幾何形狀表示。此字段確定本地總線IDE適配器的配置。選項有：兩者（主和次，默認）、禁用、主和次。
摘要屏幕：此字段確定通電時是否顯示系統配置。如果字段啟用時，計算機將在系統信息屏幕上顯示并暫停。另一個選項被禁用（默認）。
啟動時間診斷屏幕此字段確定是否顯示公司徽標或診斷屏幕通電時。選項已啟用（無徽標）或禁用（顯示徽標診斷屏幕的默認值）。這些字段控制COM端口（A或B）的配置。選擇是自動的
（系統設置端口，默認）、禁用（端口關閉）和啟用（用戶配置端口）。如果操作系統不允許手動設置端口，（操作系統控制）將顯示，這將是一個只讀字段。
基本I/O地址/IRQ：
當設置為時，此字段將顯示在COM A或COM B字段下啟用。設置為3F8/IRQ 4（COM A的默認設置）、2F8/IRQ 3（COM的默認設置B） 、3E8/IRQ 4和2E8/IRQ 3。如果將兩個端口配置為共享相同的基本I/O地址，黃色星號將出現在COM A和COM B字段旁邊，表示沖突并行端口此字段控制并行端口（LPT1）的配置。選擇是自動的系統設置端口（默認）、禁用（端口關閉）和啟用（用戶配置端口）。如果操作系統不允許手動設置端口，（操作系統控制）將顯示，這將是一個只讀字段。此字段控制并行端口的模式。選項為雙向（默認，雙向ECP）、EPP、ECP和僅輸出。基本I/O地址如果并行端口設置為Enabled（啟用）且Mode（模式）設置為雙向（默認）、ECP或僅輸出。選項為378（默認）、278和3BC公司。
中斷如果“并行端口”設置為“啟用”，則會顯示此字段。選項為IRQ 7（默認）和IRQ 5。
DMA信道如果并行端口設置為Enabled（啟用）且模式設置為ECP（ECP），則會顯示此字段。選項為DMA 1（默認）和DMA 3。軟盤控制器此字段控制傳統軟盤控制器的配置。選擇是Enabled（啟用）（默認）和Disabled（禁用）（關閉所有板載舊磁盤驅動器）?；綢/O地址此字段控制磁盤控制器的基本I/O地址。選項有：主要（默認）和次要。
The options are Yes (default) and No. Choosing Yes will cause the system to clear the
Extended System Configuration Data (ESCD) area, which will reset the Plug & Play
configuration data table when new devices are added to the system or when the BIOS is
upgraded. This field is automatically toggled to No after the data is cleared. This ESCD
clearing function is automatically performed every time the BIOS is changed, saved, and
exited, so you will only need to use this function if you want to clear the data without
changing the other BIOS settings. A large disk has more than 1024 cylinders, more than 16 heads, or more than 63 sectors
per track. Select DOS (default) if your system is DOS-based (DOS or Windows OS);
select Other if you have another OS (such as a Unix, Novell Netware, etc.). If you are
installing new software and the drive fails, change this field selection, and try to reinstall
the software. Different systems require different representations of drive geometries. This field determines the configuration of the local bus IDE adapter. The options are
Both (primary and secondary, default), Disabled, Primary, and Secondary.
Summary screen This field determines whether the system configuration is displayed on powerup. If this
field is Enabled, the computer will display and pause at the system information screen.
The other option is Disabled (default).
Boot-time Diagnostic
Screen
This field determines whether the company logo or the diagnostics screen is displayed
on powerup. The choices are Enabled (no logo) or Disabled (the logo is shown instead
of the diagnostics screen, default). These fields control the configuration of the COM ports (A or B). The choices are Auto
(the system sets up the port, default), Disabled (port turned off), and Enabled (the user
configures the port). If the OS disallows manual setup of the port, (OS Controlled) will be
displayed and this will be a read-only field.
Base I/O address/IRQ This field will appear under either of the COM A or COM B fields when they are set to
Enabled. The settings are 3F8/IRQ 4 (default for COM A), 2F8/IRQ 3 (default for COM
B), 3E8/IRQ 4, and 2E8/IRQ 3. If you configure both ports to share the same base I/O
address, yellow asterisks will appear beside the COM A and COM B fields, signifying a
conflict.
Parallel port This field controls the configuration of the parallel port (LPT1). The choices are Auto (the
system sets up the port, default), Disabled (port turned off), and Enabled (the user
configures the port). If the OS disallows manual setup of the port, (OS Controlled) will be
displayed and this will be a read-only field. This field controls the mode for the parallel port. The choices are Bi-directional (default,
two-way ECP), EPP, ECP, and Output only.
Base I/O address This field appears if the Parallel port setting is Enabled and the Mode setting is
Bi-directional (default), ECP, or Output only. The choices are 378 (default), 278, and
3BC.
Interrupt This field appears if the Parallel port setting is Enabled. The choices are IRQ 7 (default)
and IRQ 5.
DMA channel This field appears if the Parallel port setting is Enabled and the Mode setting is ECP.
The choices are DMA 1 (default) and DMA 3.
Floppy disk controller This field controls the configuration of the legacy diskette controller. The choices are
Enabled (default) and Disabled (turns off all on-board legacy diskette drives).
Base I/O address This field controls the base I/O address for the diskette controller. The options are
Primary (default) and Secondary.
