公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
產品詳情介紹
88TV01E數字量輸出模塊
說明注釋：
1.一米系統不使用延長電纜。
2.前置器傳感器默認由工廠校準為AISI 4140鋼。校準至其他目標材料可根據要求提供。3.咨詢Bently Nevada*應用說明，使用渦流接近時的注意事項超速保護應用探頭，當考慮該轉速表傳感器系統或超速測量。4.3300 XL 8 mm組件均為電氣和可與非XL 3300 5 mm進行物理互換和8 mm組件。盡管3300 XL前置器傳感器不同于前身，其設計適合于相同的4孔與4孔一起使用時的安裝模式安裝底座，并將安裝在同一個支座內空間規格（最小允許值時觀察電纜彎曲半徑）。
5.混合XL和非XL 3300系列5 mm和8 mm系統組件將系統性能限制為非XL 3300 5 mm和8 mm的規格傳感器系統。
6.3300系列5 mm探針（參考規范和訂購信息（p/n 141605-01）使用較小的物理包裝，但不會減少側視間隙或葉尖間距與8 mm探頭相比，要求更高。它是物理（非電氣）約束時使用禁止使用8mm探頭。當您的應用程序需要窄側視圖探針，請使用3300 NSv*接近傳感器系統（參考規格和訂購信息p/n 147385-01).
7.8毫米探針提供了更厚的封裝成型PPS塑料探針頭中的探針線圈。這導致探頭更加堅固。
較大的直徑探頭主體的穩健的案例。
我們建議您使用8毫米盡可能探測以提供最佳魯棒性反對身體虐待。
8.每個3300 XL延長電纜包括硅膠帶可以用它代替連接器保護器。我們不建議使用硅膠膠帶將探頭暴露在延長電纜連接中汽輪機油.規范除非另有說明，否則以下規范用于3300 XL 8 mm前置器傳感器，加長件+18之間的電纜和8 mm探針?C和+27?C(+64 ?F至+80?F） ，帶-24 Vdc電源，10kΩ負載、AISI 4140鋼靶和探針間隙為1.27 mm（50 mils）。表演特性適用于僅由3300 XL 8 mm組件。系統精度互換性規范不適用于校準到任何目標的傳感器系統除了我們的AISI 4140鋼靶標。規格除非另有說明，否則以下規范用于3300 XL 8 mm前置器傳感器，加長件+18之間的電纜和8 mm探針?C和+27?C(+64 ?F至+80?F） ，帶-24 Vdc電源，10kΩ負載、AISI 4140鋼靶和探針間隙為1.27 mm（50 mils）。表演特性適用于僅由3300 XL 8 mm組件。系統精度互換性規范不適用于校準到任何目標的傳感器系統而不是我們的AISI 4140鋼靶。
Description Notes:
1. One-metre systems do not use an extension cable.
2. Proximitor sensors are supplied by default from the
factory calibrated to AISI 4140 steel. Calibration to
other target materials is available upon request.
3. Consult Bently Nevada* Applications Note,
Considerations when using Eddy Current Proximity
Probes for Overspeed Protection Applications, when
considering this transducer system for tachometer or
overspeed measurements.
4. 3300 XL 8 mm components are both electrically and
physically interchangeable with non-XL 3300 5 mm
and 8 mm components. Although the packaging of
the 3300 XL Proximitor Sensor differs from its
predecessor, its design fits in the same 4-hole
mounting pattern when used with the 4-hole
mounting base, and will fit within the same mounting
space specifications (when minimum permissible
cable bend radius is observed).
5. Mixing XL and non-XL 3300-series 5 mm and 8 mm
system components limits system performance to the
specifications for the non-XL 3300 5 mm and 8 mm
Transducer System.
6. The 3300-series 5 mm probe (refer to Specifications
and Ordering Information p/n 141605-01) uses
smaller physical packaging, but does not reduce the
side view clearances or tip-to-tip spacing
requirements as compared to an 8 mm probe. It is
used when physical (not electrical) constraints
preclude the use of an 8 mm probe. When your
application requires narrow side view probes, use the
3300 NSv* Proximity Transducer System (refer to
Specifications and Ordering Information p/n 147385-
01).
7. 8 mm probes provide a thicker encapsulation of the
probe coil in the molded PPS plastic probe tip. This
results in a more rugged probe. The larger diameter
of the probe body also provides a stronger, more
robust case. We recommend that you use 8 mm
probes when possible to provide optimal robustness
against physical abuse.
8. Each 3300 XL extension cable includes silicone tape
that you can use instead of connector protectors. We
do not recommend silicone tape for applications that
will expose the probe-to-extension cable connection
to turbine oil.Specifications
Unless otherwise noted, the following specifications
are for a 3300 XL 8 mm Proximitor Sensor, extension
cable and 8 mm probe between +18 ?C and +27 ?C
(+64 ?F to +80 ?F), with a -24 Vdc power supply, a 10
kΩ load, an AISI 4140 steel target, and a probe
gapped at 1.27 mm (50 mils). Performance
characteristics apply to systems that consist solely
of 3300 XL 8 mm components. The system accuracy
and interchangeability specifications do not apply to
transducer systems that are calibrated to any target
other than our AISI 4140 steel target.
