公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
產品詳情介紹
3HAC028017-001伺服電機模塊
探頭和延長電纜上方
溫度范圍為-35°C至+260°C（-31°F至+500°F）前置器傳感器在0之間°C至+45°C（+32°F至+113°F），
ISF保持在±18%以內7.87 V/mm（200 mV/mil）和DSL保持在±0.152 mm范圍內（±6密耳）。
當在線性范圍，相互作用兩個獨立傳感器之間系統（串?dāng)_）將減少軸直徑大于50 mV至少50毫米（2英寸）或更大。
你應該注意保持最小間距傳感器尖端，通常至少軸向位置為40 mm（1.6 in）測量值或38毫米（1.5英寸）
用于徑向振動測量將串?dāng)_限制在50 mV或以下。
徑向振動或位置軸上的測量直徑小于76.2 mm（3英寸）通常會改變比例系數。探頭壓力3300 XL 8 mm探針設計用于密封差速器探針尖端之間的壓力和案例。探頭密封材料由Viton?組成O型環。探針不是壓力裝運前測試。聯系我們的定制設計部門，如果你需要測試一下壓力您的申請蓋章。注：客戶或用戶有責任確保所有液體和氣體都被安全地容納如果接近型探頭發生泄漏，則應予以控制。此外，pH值高或低的溶液可能腐蝕探針尖端組件，導致介質腐蝕泄漏到周圍區域。Bently Nevada，股份有限公司將對因以下原因造成的任何損害不承擔責任3300 XL 8 mm接近型探針泄漏。此外，3300XL 8 mm接近型探針不會在探頭泄漏導致的維修計劃。鋁夾支架為無螺紋安裝支架設計用于光滑外殼探針（330140、330141、330197和330198）。
在探頭之間留出間隙后，擰緊夾緊支架擰緊螺釘。
安裝螺釘有安全線預鉆。
鋁探頭螺紋安裝支架137492-AXX型A： 螺紋尺寸0 1 3/8-24
0 4 M10 x 1鋁探頭螺紋安裝支架為大多數3300和3300 XL探頭安裝。-01選項包括兩個10-24 UNC-2A安裝螺釘。-04選項包括兩個M5 x 0.8-6g安裝螺釘。這個為了安全起見，安裝螺釘有預先鉆孔金屬絲酚醛螺紋探針安裝支架27474年XX月
A： 螺紋尺寸0 1 3/8-240 4 M10 x 1我們建議使用酚醛螺紋安裝如果應用程序需要額外的與安裝位置的電氣隔離（如一些發電機和電機軸承位置）。-01選項包括兩個10-24 UNC2A安裝螺釘。-04選項包括兩個M5x 0.8-6g安裝螺釘。安裝螺釘預先鉆好安全線孔。
Probe Pressure
3300 XL 8 mm probes are
designed to seal differential
pressure between the probe tip
and case. The probe sealing
material consists of a Viton?
O-ring. Probes are not pressure
tested prior to shipment. Contact
our custom design department if
you require a test of the pressure
seal for your application.
Note: It is the responsibility of the customer or user to ensure
that all liquids and gases are contained and safely
controlled should leakage occur from a proximity probe.
In addition, solutions with high or low pH values may
erode the tip assembly of the probe causing media
leakage into surrounding areas. Bently Nevada, Inc. will
not be held responsible for any damages resulting from
leaking 3300 XL 8 mm proximity probes. In addition, 3300
XL 8 mm proximity probes will not be replaced under the
service plan due to probe leakage.
The aluminum clamp bracket is an unthreaded mounting bracket designed for use with the smooth case probes (330140, 330141, 330197 and 330198). After gapping the probe, tighten the clamp bracket by tightening the screws. The mounting screws have pre-drilled holes for safety wire. Aluminum probe threaded mounting bracket 137492-AXX A: Thread size 0 1 3/8-24 0 4 M10 x 1 The aluminum probe threaded mounting bracket is the standard mounting bracket for most 3300 and 3300 XL probe installations. The -01 option includes two 10-24 UNC-2A mounting screws. The -04 option includes two M5 x 0.8-6g mounting screws. The mounting screws have pre-drilled holes for safety wire. Phenolic threaded probe mounting bracket 27474-AXX A: Thread size 0 1 3/8-24 0 4 M10 x 1 We recommend the phenolic threaded mounting bracket if your application requires additional electric isolation from the mounting location (as in some generator and electrical motor bearing locations). The -01 option includes two 10-24 UNC2A mounting screws. The -04 option includes two M5 x 0.8-6g mounting screws. The mounting screws have pre-drilled holes for safety wire.
