公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營產品文字介紹
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
產品詳情內容介紹
AW641/52000910/STD二氧化硅分析儀
使用以下步驟標定模塊。此中使用的輸入包程序僅用作示例。建議預熱5分鐘校準前。可用輸入包該模塊最多可接受八個任意組合的輸入包。共有六個類別
z電壓，低帶寬
z當前，低帶寬
z電阻式溫度檢測器
z應變計
z電壓，寬帶寬
z線性熱電偶
有關所需的輸入范圍、輸出范圍和零件，請參閱下表預期應用所需的數量。
注：5B型第三方包裝使用第三方軟件包時，請聯系制造商尋求支持。
注：輸入包作為修訂級別A發布，由例如，零件號（AS–5B30001A）。更改將由更高級別的修訂級別。
注：使用時，所有AS–5BXX輸入包的可用輸出范圍為0-+5 V使用此模塊。
低帶寬（4 kHz）模擬電壓輸入包下表顯示了可用低壓的零件號和輸入范圍帶寬模擬電壓輸入包。J890或J892模塊可用于提供984之間的下降接口可編程控制器和S908遠程I/O上800系列I/O的遠程丟棄（RIO）網絡。
兩個接口模塊都有兩種型號
其中一種型號帶有單個F連接器用于RIO電纜連接，一個帶有兩個F連接器。在里面此外，J892還包含兩個支持ASCII輸入/輸出的半雙工端口
遠程放置的設備。DIP開關位置J890/J892接口設備都有一組DIP開關，位于模塊背面。這些交換機用于設置唯一的RIO網絡地址用于接口將駐留的遠程放置。必須在上設置投遞地址接口模塊，然后將其安裝在I/O外殼中，交換機設置為丟棄地址下降地址DIP開關有八個位置
注：如果RIO網絡前端的控制器同時支持本地I/O刪除和遠程I/O，然后將刪除地址#1保留給本地刪除第一個遠程drop地址為drop#2。如果控制器不支持本地I/O，第一個遠程拖放地址為拖放#1。有關984的完整列表控制器及其I/O支持功能，請參閱遠程I/O系統
規劃和安裝指南（890 USE 101 00）。用于丟棄尋址的開關位置。
Available Input Pack
Use the following procedure to calibrate the module. The input pack used in this procedure is used only as an example. A five-minute warm-up time is recommended prior to calibration.
The module accepts up to eight input packs of any mix. Six categories are available z Voltage, low bandwidth z Current, low bandwidth z RTD z Strain gauge z Voltage, wide bandwidth z Linear thermocouple Refer to the following tables for the desired input range, output range, and part number required for the intended application. NOTE: 5B type third party packs When using third party packs, contact the manufacturer for support. NOTE: Input packs are issued as revision level A’s, denoted by the last item of the part number, for example, (AS–5B30001A). Changes will be noted by higher revision levels. NOTE: The usable output range for all AS–5BXX input packs is 0—+5 V when used with this module. Low Bandwidth (4 kHz) Analog Voltage Input Packs The following table presents the part numbers and input ranges for the available low bandwidth analog voltage input packs.
A J890 or J892 module may be used to provide the drop interface between a 984 programmable controller and a remote drop of 800 series I/O on an S908 remote I/O (RIO) network. Both interface modules are available in two models - one with a single F connector for RIO cable connection and one with two F connectors. In addition, the J892 contains two half-duplex ports that will support ASCII input/output devices at the remote drop.
DIP Switch Location
This J890/J892 Interface devices both have a set of DIP switches located on the back of the module. These switches are used to set a unique RIO network address for the remote drop where the interface will reside. The drop address must be set on the Interface module before it is installed in the I/O housing Switch Settings for Drop Address The drop address DIP switch has eight positions NOTE: If the controller at the head end of the RIO network supports both a local I/O drop and remote I/O, then drop address # 1 is reserved for the local drop and the first remote drop is addressed as drop # 2. If the controller does not support local I/O, the first remote drop is addressed as drop # 1. For a complete list of 984 controllers and their I/O support capabilities, refer to the Remote I/O System Planning and Installation Guide (890 USE 101 00). Switch positions for drop addressing.
