公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營產品文字介紹
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃氣發電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
產品詳情內容介紹
CI532V02接口卡
DIP開關位置J892接口設備在用于設置ASCI設備地址和ASCII通信的模塊參數。
如果您想在此放置時支持ASCII設備，ASCII開關在將模塊安裝到I/O外殼中之前，必須進行設置。
J890和J892 RIO接口模塊的表面都有一組LED指示模塊和一個或兩個BNC電纜端口的RIO處理狀態用于將drop連接到RIO網絡。J892有額外的LED指示燈，指示ASCII設備處理狀態插座和一對25針D-shell內螺紋端口，用于連接ASCII設備下降。
注意：前面板上的LED指示燈也提供診斷功能信息各種閃爍模式指示RIO接口中檢測到的錯誤和/或在ASCII接口中。
用戶連接任何支持S908 RIO網絡的984可編程控制器都可以使用800_系列I/O在其任何或所有遠程丟包，以及的任何遠程丟包800系列I/O可以使用J890或J892作為下拉接口模塊。
J890/J892接口模塊與所有800系列I/O模塊兼容
用于S908 RIO網絡，可支持多達1024個輸入位和1024個輸出位一滴（取決于前端控制器的性能）。
J890/J892接口是一個1.5插槽模塊，設計用于安裝在兩個插槽中緊靠主電源右側，在主殼體中一滴。
接口通過drop向800系列I/O發送數據和接收來自800系列I/O的數據底板；它通過RIO電纜系統。
除了管理掉線內和RIO網絡上的I/O數據流外，J890/J892還用于定義RIO網絡上的drop地址。每個該模塊配有一組DIP開關，您可以使用這些開關設置獨特的下降住址J982還提供了第二組DIP開關，用于指定ASCII設備地址。交換機組的位置及其尋址方案
在第230頁的P890和P892投遞地址開關設置中定義J892 ASCII設備的DIP開關設置，第212頁。
當J890/J892接口模塊安裝在drop中后，模塊將對自身執行一組置信度測試。
如果在模塊的RIO處理部分、RIO LED中檢測到任何故障在前面板上會顯示錯誤代碼的閃爍模式。
DIP Switch Location
J892 Interface devices have an additional set of DIP switches located at the back of the module for setting ASCI device addresses and ASCII communication parameters. If you want to support ASCII devices at this drop, the ASCII switch setting must be made before the module is installed in the I/O housing.On the face of both the J890 and J892 RIO interface modules are a set of LEDs that indicate the RIO processing status of the module and one or two BNC cable ports used to connect the drop to the RIO network.The J892 has additional LEDs that indicate the ASCII device processing status at the drop and a pair of 25-pin, D-shell, female ports for connecting ASCII devices at the drop. NOTE: The LED indicators on the front panels also provide diagnostic information.Various flash patterns indicate errors detected in the RIO interface and/or in the ASCII interface.
When power is applied to the I/O housing after the J890/J892 interface module has been installed in the drop, the module performs a set of confidence tests on itself. If any faults are detected in the RIO processing portion of the module, the RIO LEDs on the front panel will display a flash pattern of error codes.
User Connections
Any 984 programmable controller that supports the S908 RIO network can employ 800_series I/O at any or all of its remote drops, and any remote drop of 800_series I/O can use a J890 or J892 as the drop interface module. The J890/J892 Interface modules are compatible with all 800 series I/O modules used in a S908 RIO network and may support up to 1024 input and 1024 output bits in a drop (depending on the capability of the head-end controller). A J890/J892 Interface is a 1.5 slot module designed to be installed in the two slots immediately to the right of the primary power supply in the primary housing of a drop. The Interface sends data to and receives data from the 800 series I/O via the drop’s backplane; it communicates with the RIO processing unit in the controller via the RIO cable system. In addition to managing the I/O data flow within the drop and over the RIO network, a J890/J892 is also used to define the address of the drop on the RIO network. Each module is equipped with a set of DIP switches with which you can set a unique drop address. The J982 also provides a second set of DIP switches for specifying ASCII device addresses. The locations of the switch packs and their addressing scheme are defined in P890 and P892 Switch Settings for the Drop Address, page 230 and J892 DIP Switch Settings for ASCII Devices, page 212.
