產品內容介紹
A-B 80190-280-01-R控制板擴展數據
更新選項模塊固件可通過網絡或串行方式更新選件模塊固件使用1203-USB或1203-SSS從計算機直接連接到驅動器串行轉換器。
通過網絡更新固件時，可以使用Allen Bradley ControlFLASH軟件工具，DriveExplorer的內置更新功能Lite或Full軟件，或DriveExecutive的內置更新功能軟件通過直接串行連接從計算機更新固件時驅動器，您可以使用上述相同的Allen-Bradley軟件工具，或者您可以使用設置為X調制解調器協議的超級終端。
本章提供如何配置羅克韋爾自動化的說明ControlLogix控制器與選項模塊通信并連接PowerFlex驅動器。
有關使用PLC-5、SLC 500或MicroLogix 1100/1400的信息控制器，請參閱EtherNet/IP網絡通信的控制器示例對于PowerFlex 750系列驅動器，出版物750COM-AT001。使用RSLinx經典軟件RSLinx Classic軟件的所有變體（Lite、Gateway、OEM等）用于在計算機、網絡和控制器。
RSLinx Classic軟件要求其網絡特定驅動程序在與網絡設備建立通信之前配置。
到配置RSLinx驅動程序，按照以下步驟操作。
1.啟動RSLinx Classic軟件。
2.從通信菜單中，選擇配置驅動程序以顯示“配置驅動程序”對話框。
3.從Available Driver Types（可用驅動程序類型）下拉菜單中，選擇EtherNet/IP駕駛員
4.單擊添加新以顯示添加新RSLinx驅動程序?qū)υ捒颉?br/>
5.使用默認名稱或鍵入名稱。
6.單擊“確定”。此時會出現“配置驅動程序：”對話框。
7.根據您的應用程序，選擇瀏覽本地或遠程子網選項。
8.單擊“確定”。9.單擊“關閉”關閉“配置驅動程序”對話框。
10.保持RSLinx軟件運行，并驗證計算機是否識別驅動器。
a、 從通信菜單中，選擇RSWho。
b、 在菜單樹中，單擊以太網驅動程序旁邊的“+”。
請注意，其他兩個RSLinx驅動程序（以太網設備或遠程設備（通過Linx網關）。如果“EtherNet”/IP驅動程序“無法看到您的驅動器。
Updating the Option Module Firmware
The option module firmware can be updated over the network or serially through a direct connection from a computer to the drive using a 1203-USB or 1203-SSS serial converter. When updating firmware over the network, you can use the Allen-Bradley ControlFLASH software tool, the built-in update capability of DriveExplorer Lite or Full software, or the built-in update capability of DriveExecutive software. When updating firmware through a direct serial connection from a computer to a drive, you can use the same Allen-Bradley software tools described above, or you can use HyperTerminal set to the X-modem protocol.This chapter provides instructions on how to configure a Rockwell Automation ControlLogix controller to communicate with the option module and connected PowerFlex drive. For information on using a PLC-5, SLC 500, or MicroLogix 1100/1400 controller, see Controller Examples for EtherNet/IP Network Communications with PowerFlex 750-Series Drives, publication 750COM-AT001.
Using RSLinx Classic Software
RSLinx Classic software, in all its variations (Lite, Gateway, OEM, and so forth), is used to provide a communication link between the computer, network, and controller. RSLinx Classic software requires its network-specific driver to be configured before communication is established with network devices. To configure the RSLinx driver, follow this procedure. 1. Start RSLinx Classic software. 2. From the Communications menu, choose Configure Drivers to display the Configure Drivers dialog box. 3. From the Available Driver Types pull-down menu, choose EtherNet/IP Driver. 4. Click Add New to display the Add New RSLinx Driver dialog box. 5. Use the default name or type a name. 6. Click OK. The “Configure driver:” dialog box appears. 7. Depending on your application, select either the browse local or remote subnet option. 8. Click OK.9. Click Close to close the Configure Drivers dialog box. 10. Keep RSLinx software running and verify that your computer recognizes the drive. a. From the Communications menu, choose RSWho. b. In the menu tree, click “+” next to the Ethernet driver. Note that two other RSLinx drivers (Ethernet devices or Remote Devices via Linx Gateway) may be used. Use one of these drivers if the “EtherNet/ IP Driver” cannot see your drive.
公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
