產品內容介紹
HONEYWELL 10266S-1-020-200-1-0-00000-100-00控制器
使用帶有RSLogix 5000的自動設備配置（ADC）軟件，20.00或更高版本自動設備配置（ADC）是一個“RSLogix 5000軟件，版本20.00或更高版本，支持自動下載配置的功能數據這在Logix控制器建立EtherNet/IP網絡后發生連接到PowerFlex 750系列驅動器，固件版本4.001或更高版本，以及其相關外圍設備。
RSLogix 5000軟件16.00或更高版本的項目（.ACD文件）包含項目中任何PowerFlex驅動器的配置設置。當項目下載到Logix控制器，這些設置也會被傳輸并駐留在控制器的內存中。
在RSLogix 5000軟件中使用ADC之前版本20.00，下載PowerFlex 750系列驅動器配置數據是手動過程，其中用戶將打開相應驅動器中的驅動器選項卡RSLogix 5000軟件中的附加配置文件（AOP），然后單擊下載圖標。
RSLogix 5000軟件（20.00版或更高版本）中的ADC現在可以自動執行該過程并節省用戶時間。它在更換驅動器時特別有用生產線停機時的情況。
ADC還可以與固件主管協同工作。如果固件主管為驅動器設置并啟用（必須使用“完全匹配”鍵），則驅動器/外圍設備將在任何ADC之前自動升級（如有必要）該端口的操作。版本4.01驅動器附加配置文件（AOP）RSLogix 5000軟件20.00版隨4.01版驅動器附加模塊一起提供配置文件（AOP）。
使用版本時請注意以下ADC操作狀態4.01驅動器AOP：
?添加新驅動器時，默認情況下會為符合以下條件的任何驅動器啟用ADC支持ADC，例如固件為7.001或更高版本的PowerFlex 753驅動器，或固件為4.001或更高版本的PowerFlex 755驅動器。
?將RSLogix 5000項目版本16.00…19.00轉換為版本時20.00個項目（4.01版驅動器AOP），ADC將由任何支持ADC的驅動器的默認值，如PowerFlex 753驅動器固件7.001或更高版本，或固件4.001的PowerFlex 755驅動器或更高版本。Logix“擁有”驅動器的配置。ADC將在任何情況下觸發Logix控制器檢測到配置簽名不匹配的時間建立EtherNet/IP網絡I/O連接時。
使用其他配置工具，如HIM、DriveExplorer軟件或DriveTools SP軟件應最小化并限制為僅用于監視操作。
這些工具所做的任何配置更改都將導致配置下次Logix控制器連接到設備時簽名不匹配ADC將覆蓋其他工具所做的任何更改。
考慮使用寫入掩碼功能（驅動器參數888-[Write Mask Cfg]）以防止連接到除嵌入式EtherNet/IP端口以外的其他端口的工具PowerFlex 755驅動器寫入驅動器。任何驅動器配置更改應使用RSLogix 5000附加配置文件（AOP）創建。
Using Automatic Device Configuration (ADC) with RSLogix 5000
Software
Version 20.00 or Later Automatic Device Configuration (ADC) is an ‘RSLogix 5000 software, version 20.00 or later, feature’ that supports the automatic download of configuration data. This occurs after the Logix controller establishes an EtherNet/IP network connection to a PowerFlex 750-Series drive, firmware revision 4.001 or later, and its associated peripherals. An RSLogix 5000 software, version 16.00 or later, project (.ACD file) contains the configuration settings for any PowerFlex drives in the project. When the project is downloaded to the Logix controller, these settings are also transferred and reside in the controller’s memory. Prior to ADC in RSLogix 5000 software version 20.00, downloading PowerFlex 750-Series drive configuration data was a manual process where the user would open the Drive tab in the respective Drive Add-on Profile (AOP) in RSLogix 5000 software and click the Download icon. ADC in RSLogix 5000 software, version 20.00 or later, now automates the process and saves the user time. It is particularly beneficial in a drive replacement situation when a production line is down. ADC can also work in tandem with Firmware Supervisor. If Firmware Supervisor is set up and enabled for a drive (“Exact Match” keying must be used), the drive/ peripheral will be automatically upgraded (if necessary) prior to any ADC operation for that port.
Version 4.01 Drive Add-on Profiles (AOPs)
RSLogix 5000 software, version 20.00 ships with version 4.01 Drive Add-on Profiles (AOPs). Note the following ADC operating status when using version 4.01 Drive AOPs: ? When adding a new drive, ADC is enabled by default for any drive that supports ADC, such as PowerFlex 753 drives with firmware 7.001 or later, or PowerFlex 755 drives with firmware 4.001 or later. ? When converting RSLogix 5000 projects, version 16.00…19.00, to version 20.00 projects (with version 4.01 Drive AOPs), ADC will be enabled by default for any drive that supports ADC, such as PowerFlex 753 drives with firmware 7.001 or later, or PowerFlex 755 drives with firmware 4.001 or later.Logix ‘owns’ the configuration of the drive. ADC will be triggered any time the Logix controller detects a configuration signature mismatch when establishing an EtherNet/IP network I/O connection. The use of other configuration tools, such as a HIM, DriveExplorer software, or DriveTools SP software, should be minimized and restricted to monitor-only operation. Any configuration changes made by these tools will cause a configuration signature mismatch the next time the Logix controller connects to the device and ADC will write over any changes made by the other tools. Consider using the Write Mask function (drive Parameter 888 - [Write Mask Cfg]) to prevent tools connected to ports other than the Embedded EtherNet/IP port in a PowerFlex 755 drive from writing to the drive. Any drive configuration changes should be made with the RSLogix 5000 Add-on Profile (AOP).
公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
