350005-01-01-00-00-01模塊卡件
機架置于跳閘倍增
I/O模塊系統觸點跳閘倍增用于將3500機架置于跳閘倍增。報警抑制用于抑制3500機架中的所有報警。機架復位用于清除鎖定報警和定時OK通道失效。最大電流<1 mA dc，干觸點至公共線。RS232/RS422開關（僅限RS232/RS422 I/O模塊）用于在RS232和RS422之間進行選擇，以便與Bently Nevada主機軟件進行通信。通信前面板通信僅RS232串行通信。本特利內華達專利協議。數據速率最大38.4 k波特（支持自動波特）。用途允許數據采集和3500機架配置。電纜長度最大30米（100英尺）。RS232/RS422輸入/輸出模塊通信RS232、RS422或外部調制解調器。本特利內華達專利協議。波特率最大38.4 k波特率（支持自動波特率）。用途允許數據采集和3500機架配置。電纜長度RS232最大30米（100英尺）。RS422最大1200米（4000英尺）。調制解調器咨詢調制解調器制造商，通常為3米（10英尺）。調制解調器I/O模塊通信Hayes AT兼容。本特利內華達專利協議。波特率最大14.4 k波特率。用途允許數據采集和3500機架配置。電纜長度最大為2.1米（7英尺）。調制解調器到電話插孔。規格和訂購信息零件號141531-01 A版（03/07）第4頁，共8頁，僅限機架連接器通信RS422。本特利內華達州財產協議。波特率最大38.4 k波特率。
內置調制解調器
用途允許多個3500機架菊花鏈連接在一起，以便與3500主機軟件通信。電纜長度最大1200米（4000英尺）。數據管理器I/O模塊（2組端口）通信Bently Nevada專有。Bently Nevada協議優先。波特率9600波特固定。目的允許Bently Nevada瞬態數據接口外部或動態數據接口外部通信處理器進行靜態和動態數據采集。電纜長度最大為3米（10英尺）。環境限制機架接口模塊和RS232/RS422 I/O操作溫度：-30°C至+65°C（-22°F至+150°F）。儲存溫度：-40°C至+85°C（-40°F至+185°F）。調制解調器輸入/輸出模塊工作溫度：0°C至+50°C（+32°F至+122°F）。儲存溫度：-40°C至+85°C（-40°F至+185°F）。濕度：95%，無冷凝。CE標志指令EMC指令：EN50081-2：輻射發射EN 55011，A類傳導發射EN 5501，A類EN50082-2：靜電放電EN 61000-4-2，標準B輻射敏感性ENV 50140，標準A傳導敏感性ENV 50141，標準A電快速瞬變EN 61000-4-4，標準B浪涌能力規范和訂購信息零件號141531-01版本A（03/07）第5頁，共8頁EN 61000-4-5，標準B磁場EN 61000--4-8，標準A電源浸漬EN 61000-4-11，標準B無線電話ENV 50204，標準B低壓指令：EN 61010-1安全要求危險區域認證CSA/NRTL/C：認證選項（01）I級，分區2 A、B、C、D組T4@Ta=-20°C至+65°C（-4°F至+150°F）認證號CSA 150268-1002151（LR 26744）物理RIM尺寸（高x寬x深）：241.3 mm x 24.4 mm x 241.8 mm（9.5英寸x 0.96英寸x 9.52英寸）。重量：0.91千克（2.0磅）。RS232/RS422 I/O尺寸（高x寬x深）：241.3毫米x 24.4毫米x 99.1毫米（9.50英寸x 0.96英寸x 3.90英寸）。重量：0.45千克（1.0磅）。調制解調器I/O尺寸（高x寬x深）：241.3毫米x 24.4毫米x 99.1毫米（9.50英寸x 0.96英寸x 3.90英寸）。重量0.45千克（1.0磅）。Data Manager I/O尺寸（高x寬x深）：241.3 mm x 24.4 mm x 99.1 mm（9.50英寸x 0.96英寸x 3.90英寸）。重量：0.45千克（1.0磅）。機架空間要求RIM主板：1個全高前插槽。RIM I/O模塊：1個全高后插槽。Data Manager I/O模塊：1個全高后插槽。訂購信息3500/20-AXX-BXX-CXX A：機架接口類型0 1標準RIM（用于標準監控應用）0 2 TMR RIM（僅用于需要三模塊冗余配置的應用）B：I/O模塊類型0 1帶內置調制解調器的I/O模塊0 2帶RS232/RS422接口的I/O模塊C：機構批準選項0 0無
Rack set to trip multiply
The I/O module system contact trip multiplier is used to place the 3500 rack in the trip multiplier. Alarm Inhibit is used to suppress all alarms in the 3500 rack. Rack reset is used to clear lockout alarms and timed OK channel failures. Maximum current<1 mA dc, dry contact to common. The RS232/RS422 switch (RS232/RS422 I/O modules only) is used to select between RS232 and RS422 for communication with Bently Nevada host software. The communication of the front panel is only RS232 serial communication. Bently Nevada Patent Agreement. The maximum data rate is 38.4 k baud (automatic baud is supported). Purpose Allows data acquisition and 3500 rack configuration. The maximum cable length is 30 meters (100 feet). RS232/RS422 I/O module communication RS232, RS422 or external modem. Bently Nevada Patent Agreement. The maximum baud rate is 38.4 k (automatic baud rate is supported). Purpose Allows data acquisition and 3500 rack configuration. Cable length RS232 maximum 30 meters (100 feet). RS422 1200 meters (4000 feet) maximum. Consult the modem manufacturer for the modem, usually 3 meters (10 feet). Modem I/O module communication Hayes AT compatible. Bently Nevada Patent Agreement. Baud rate 14.4 k baud rate maximum. Purpose Allows data acquisition and 3500 rack configuration. The maximum cable length is 2.1 meters (7 feet). Modem to telephone jack. Specifications and Ordering Information Part Number 141531-01 Rev A (03/07) Page 4 of 8 for Rack Connector Communications RS422 only. Bentley Nevada Property Agreement. Baud rate 38.4 k baud rate maximum.
Internal Modem
Purpose Allows multiple 3500 racks to be daisy chained together for communication with 3500 host software. The maximum cable length is 1200 meters (4000 feet). The data manager I/O module (2 sets of ports) communicates Bently Nevada proprietary. Bently Nevada protocol takes precedence. Baud rate 9600 baud fixed. Purpose To allow Bently Nevada Transient Data Interface external or Dynamic Data Interface external communication processors to perform static and dynamic data acquisition. The maximum cable length is 3 meters (10 feet). Ambient limit Rack Interface Module and RS232/RS422 I/O operating temperature: - 30 ° C to+65 ° C (- 22 ° F to+150 ° F). Storage temperature: - 40 ° C to+85 ° C (- 40 ° F to+185 ° F). Modem I/O module operating temperature: 0 ° C to+50 ° C (+32 ° F to+122 ° F). Storage temperature: - 40 ° C to+85 ° C (- 40 ° F to+185 ° F). Humidity: 95%, non condensing. CE Mark Directives EMC Directives: EN50081-2: Radiated Emissions EN 55011, Class A Conducted Emissions EN 5501, Class A EN50082-2: Electrostatic Discharge EN 61000-4-2, Standard B Radiated Susceptibility ENV 50140, Standard A Conducted Susceptibility ENV 50141, Standard A Electrical Fast Transients EN 61000-4-4, Standard B Surge Capability Specifications and Ordering Information Part No. 141531-01 Version A (03/07) Page 5 of 8 EN 61000-4-5, Standard B Magnetic Field EN 61000-4-8, Standard A power impregnation EN 61000-4-11, standard B wireless telephone ENV 50204, standard B low-voltage directive: EN 61010-1 safety requirements Hazardous area certification CSA/NRTL/C: certification option (01) Class I, Division 2 Groups A, B, C, D T4@Ta =-20 ° C to+65 ° C (- 4 ° F to+150 ° F) Certification No. CSA 150268-1002151 (LR 26744) Physical RIM dimensions (H x W x D): 241.3 mm x 24.4 mm x 241.8 mm (9.5 in x 0.96 in x 9.52 in). Weight: 0.91 kg (2.0 lb). RS232/RS422 I/O dimensions (H x W x D): 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in). Weight: 0.45 kg (1.0 lb). Modem I/O size (H x W x D): 241.3 mm x 24.4 mm x 99.1 mm (9.50 inches x 0.96 inches x 3.90 inches). Weight 0.45 kg (1.0 lb). Data Manager I/O dimensions (H x W x D): 241.3 mm x 24.4 mm x 99.1 mm (9.50 inches x 0.96 inches x 3.90 inches). Weight: 0.45 kg (1.0 lb). Rack space requirements RIM motherboard: 1 full height front slot. RIM I/O module: 1 full height rear slot. Data Manager I/O module: 1 full height rear slot. Ordering information 3500/20-AXX-BXX-CXX A: Rack interface type 0 1 Standard RIM (for standard monitoring applications) 0 2 TMR RIM (for applications requiring three module redundancy configuration only) B: I/O module type 0 1 I/O module with built-in modem 0 2 I/O module with RS232/RS422 interface C: Agency approved option 0 0 None
