IS200ISBDG1AAA機器人模塊
規格代碼：
AO610 | EAN代碼：8712739382204 Facestock一種用于化妝品和食品柔性包裝的熱密封、銀、化學處理的聚酯面層壓板。粘合劑涂層三層層壓板：PET 12μ/Adh/Alu 9μ/Adh/LLDPE 75μ。應用和使用聚酯面層壓袋材料，用于干濕物品的柔性包裝，如化妝品面霜、乳液、油和洗發水的產品樣品。良好的耐化學性。轉換和印刷經過化學處理的PET表面提供可印刷性柔印和UV低遷移油墨膠印。相對較厚的產品具有非常好的尺寸穩定性。實際使用聲明：本產品應在最終用戶條件下進行徹底測試，以確保其滿足特定應用的要求。如果預期用途是食品，情況尤其如此。因此，Avery Dennison要求客戶進行充分的測試，以確保預期應用不會造成任何傷害，并且是安全的。保質期為獲得最佳性能，在FINAT規定的儲存條件（20-25°C；40-50%RH）下，在制造之日起半年內使用本產品。在這些條件下長時間儲存可能會縮短保質期?；?11 g/m2ISO 536卡尺96μm ISO 534斷裂伸長率CD>55%DIN 53455斷裂伸長度MD>70%DIN 53456透氧性（23°C；50%RH）<0.05 cm3/m2/24小時ASTM D3985 2%割線模量MD>850 N/mm2DIN EN ISO 527 T 3 2%割線模數CD>800 N/mm229/DIN 52 121撕裂埃爾門多夫MD>0.60 N DIN EN 21974
撕裂埃爾門道夫
CD>1.10 N DIN EN21974抗拉強度。MD>35 N/mm2ISO 527-3抗拉強度。CD>35 N/mm2ISO 527-3 WVTR（38°C；90%RH）<0.05 g/m2/24小時ASTM F1249密封強度>35 N/15mm DIN 52529@140°C/5巴/0.5秒COF內/內0.20-0.35μs ASTM D1895 COF外/外0.30-0.45μs ASTMD1895 AO610 Fasson?COSMETIC WEB SILV96 HEAV這是一個自動生成的數據表。所有數據均視為典型值，如有更改，恕不另行通知。始終建議進行進一步測試。如果您想對此數據表提出建議或評論，請發送電子郵件至 V發布日期： 技術信息和建議均基于可靠的測試，但不構成擔?；虮ＷC。所有Avery Dennison產品都是在買方已獨立確定此類產品適用于其目的的情況下銷售的。艾利丹尼森的所有產品均按照艾利丹尼遜的一般銷售條款和條件銷售，請參見http://terms.europe.averydennison.com?2022 Avery Dennison Corporation版權所有。保留所有權利。Avery Dennison和所有其他Avery丹尼森品牌、本出版物、其內容、產品名稱和代碼均歸Avery Dannison Corporation所有。所有其他品牌和產品名稱均為其各自所有者的商標。本出版物不得全部或部分用于艾利丹尼森營銷以外的任何目的、復制或復制
Specification code:
AO610 | EAN code: 8712739382204 Facestock is a heat sealed, silver and chemically treated polyester faced laminate used for flexible packaging of cosmetics and food. Adhesive coated three-layer laminate: PET 12 μ/ Adh/Alu 9 μ/ Adh/LLDPE 75 μ。 Apply and use polyester laminated bag materials for flexible packaging of dry and wet articles, such as cosmetics face cream, lotion, oil and shampoo product samples. Good chemical resistance. Conversion and printing Chemically treated PET surface provides printability flexography and UV low migration ink offset printing. Relatively thick products have very good dimensional stability. Statement of actual use: This product should be thoroughly tested under the conditions of the end user to ensure that it meets the requirements of the specific application. This is especially true if the intended use is food. Therefore, Avery Dennison requires customers to conduct adequate testing to ensure that the intended application does not cause any harm and is safe. Shelf life To obtain the best performance, use this product within half a year from the date of manufacture under the storage conditions specified by FINAT (20-25 ° C; 40-50% RH). Long term storage under these conditions may shorten the shelf life. Base weight 111 g/m 2 ISO 536 Caliper 96 μ m ISO 534 Elongation at break CD>55% DIN 53455 Elongation at break MD>70% DIN 53456 Oxygen permeability (23 ° C; 50% RH)<0.05 cm 3/ m 2/ 24h ASTM D3985 2% secant modulus MD>850 N/mm 2 DIN EN ISO 527 T 3 2% secant modulus CD>800 N/mm 2 29/DIN 52 121 Tear Elmendorf MD>0.60 N DIN EN 21974
Tear Elmendorf
CD>1.10 N DIN EN21974 Tensile strength. MD>35 N/mm 2 ISO 527-3 Tensile Strength. CD>35 N/mm 2 ISO 527-3 WVTR（38°C；90%RH）<0.05 g/m 2/ 24h ASTM F1249 sealing strength>35 N/15mm DIN 52529@140 ° C/5 bar/0.5 sec COF inner/inner 0.20-0.35 μ S ASTM D1895 COF outer/outer 0.30-0.45 μ s ASTMD1895 AO610 Fasson ? COSMETIC WEB SILV96 HEAV This is an automatically generated data table. All data are considered as typical values and are subject to change without notice. Further testing is always recommended. If you would like to make suggestions or comments on this data sheet, please send an email to V Release Date: Technical information and suggestions are based on reliable tests, but do not constitute a warranty or guarantee. All Avery Dennison products are sold when the Buyer has independently determined that such products are suitable for its purpose. All products of Allison Denison are sold in accordance with the general terms and conditions of sale of Allison Denison, see http://terms.europe.averydennison.com ? Copyright 2022 Avery Dennison Corporation. All rights reserved. Avery Dennison and all other Avery Dennison brands, this publication, its content, product names and codes are the property of Avery Dennison Corporation. All other brand and product names are trademarks of their respective owners. This publication may not be used, copied or reproduced, in whole or in part, for any purpose other than marketing by Ellie Dennison
