IS200DTTCH1A自動化模塊備件
輸出范圍2V
DC至60V DC輸出額定值1.0 A，每個通道連續；每個I/O接口斷開狀態泄漏最大值為3.0 A，每個卡最大本地總線電流（標稱12V DC）為1.2 mA，典型值為100 mA，每個卡的最大現場電路功率為150 mA，每個I/O接口可配置通道類型輸出離散輸出輸出在24V DC下保持在控制器提交的最后狀態。瞬時輸出輸出在預先配置的時間段（100 ms至100 s）內有效。連續脈沖輸出輸出在預配置的基本時間段（100 ms至100 s）中處于活動狀態。分辨率=5 ms可選保險絲2.0 A DO卡的簡化電路和連接圖，8通道，24V DC，高壓側。。
終端故障檢測
是僅在以下板卡中工作的功能：DI Plus、32通道、24V DC干觸點。DO Plus，32通道，24V DC高壓側。當與M系列質量連接解決方案或P+F HiD或HiC IS屏障和DeltaV DCS終端板結合使用時。所有其他經批準的第三方大規模終端產品可用于非Plus S系列和M系列I/O接口。M系列傳統I/O水平載體與S系列水平控制器載體在物理上不兼容。使用M系列控制器安裝M系列I/O接口，使用S系列控制器安裝S系列I/O接口。DeltaV M系列傳統I/O 2022年10月www.emerson。com/deltav 30認證以下認證適用于M系列傳統I/O（請參閱每個產品的實際認證）
Output range 2V
DC to 60V DC output rating 1.0 A, each channel continuous; The maximum leakage value of each I/O interface in the disconnected state is 3.0 A, the maximum local bus current (nominal 12V DC) of each card is 1.2 mA, and the typical value is 100 mA. The maximum field circuit power of each card is 150 mA. Each I/O interface can be configured with channel type output discrete output to maintain the last state submitted by the controller at 24V DC. The instantaneous output is valid for a pre configured time period (100 ms to 100 s). The continuous pulse output is active for a pre configured basic time period (100 ms to 100 s). Resolution=5 ms Simplified circuit and connection diagram of optional fuse 2.0 A DO card, 8-channel, 24V DC, high voltage side..
Terminal fault detection
It is a function that only works in the following boards: DI Plus, 32 channels, 24V DC dry contact. DO Plus, 32 channels, 24V DC high voltage side. When used in conjunction with the M series quality connectivity solution or P+F HiD or HiC IS barriers and DeltaV DCS terminal boards. All other approved third-party large-scale terminal products can be used for non Plus S series and M series I/O interfaces. M series traditional I/O horizontal carrier is physically incompatible with S series horizontal controller carrier. Use the M series controller to install the M series I/O interface, and use the S series controller to install the S series I/O interface. DeltaV M Series Traditional I/O October 2022 www emerson。 Com/deltav 30 Certification The following certifications apply to M series traditional I/O (see the actual certification for each product)
