模塊備件IS200IGPAG2AED
重要信息：
此更新可能會導致適配器參數恢復為默認值。升級前，您可能需要使用DriveExplorer或HIM CopyCat功能保存配置。4.要啟動閃存更新，請單擊閃存更新…按鈕。然后從可用更新列表中選擇“4.001.xx完整”，然后單擊下一步>。按照其余屏幕提示操作，直到閃存更新過程完成并顯示新固件版本（v4.001）。使用DriveExecutive 1。安裝了閃存套件（請參閱第5頁的安裝閃存套件）后，啟動DriveEx，并使用連接到適配器的驅動器聯機（通過EtherNet/IP或1203-USB或1203-SSS轉換器）。2.在DriveExecutive樹視圖中，單擊20-COMM-E適配器。然后單擊信息圖標，如圖2所示，以顯示適配器的Properties屏幕。3.在20-COMM-E屬性屏幕上，單擊組件詳細信息選項卡。重要信息：此更新可能會導致適配器參數恢復為默認值。升級前，您可能需要使用DriveExecutive或HIM CopyCat功能保存配置。4.要啟動閃存更新，請單擊閃存更新按鈕。
設備列表
然后從可用設備列表中選擇20-COMM-E，然后單擊下一步>。5.從可用更新列表中選擇“4.001.xx完整”，然后單擊“下一步”>。按照其余屏幕提示操作，直到閃存更新過程完成并顯示新固件版本（v4.001）。20-COMM-E EtherNet/IP適配器固件v4.001 7使用ControlFLASH 1.安裝了閃存套件（請參閱第5頁的安裝閃存套件），通過選擇“開始”>“（所有）程序”>“閃存編程工具”>“ControlFLASH”來啟動ControlFLASH。2.在ControlFLASH歡迎屏幕上，單擊下一步>。3.從列表中選擇20-COMM-E，然后單擊下一步>。重要提示：此更新可能會導致適配器參數恢復為默認值。升級前，您可能需要使用HIM CopyCat功能、DriveExplorer或DriveExecutive保存配置。4.展開您正在使用的通信路徑的樹視圖，然后選擇代表您正在更新的20-COMM-E適配器的驅動器的驅動器圖標。然后單擊“確定”。5.在顯示“找到多個程序集”窗口的情況下，從列表中選擇“端口X-20-COMM-E”，然后單擊“確認”。6.在顯示“固件修訂”窗口的狀態下，從可用更新列表中選擇”4.001.xx完整“，然后單擊下一步>。按照其余屏幕提示操作，直到閃存過程完成并顯示新固件版本（v4.001）。
Important information:
This update may cause the adapter parameters to return to their default values. Before upgrading, you may need to save the configuration using DriveExplorer or the HIM CopyCat feature. 4. To start the flash update, click the Flash Update... button. Then select 4.001.xx Complete from the list of available updates, and click Next>. Follow the remaining screen prompts until the flash update process is complete and the new firmware version (v4.001) is displayed. Use DriveExecutive 1. After installing the flash kit (see Installing the flash kit on page 5), start DriveEx and go online using the drive connected to the adapter (via EtherNet/IP or 1203-USB or 1203-SSS converters). 2. In the DriveExecutive tree view, click the 20-COMM-E adapter. Then click the information icon, as shown in Figure 2, to display the Properties screen of the adapter. 3. On the 20-COMM-E Properties screen, click the Component Details tab. Important: This update may cause the adapter parameters to return to their default values. Before upgrading, you may need to use DriveExecutive or HIM CopyCat to save the configuration. 4. To start the flash update, click the flash update button.
Equipment list
Then select 20-COMM-E from the list of available devices and click Next>. 5. Select 4.001.xx Complete from the list of available updates, and then click Next>. Follow the remaining screen prompts until the flash update process is complete and the new firmware version (v4.001) is displayed. 20-COMM-E EtherNet/IP adapter firmware v4.001 7 uses ControlFLASH 1. After installing the flash kit (see Installing the flash kit on page 5), start ControlFLASH by selecting Start>(All) Programs>Flash Programming Tool>ControlFLASH. 2. On the ControlFLASH welcome screen, click Next>. 3. Select 20-COMM-E from the list and click Next>. Important: This update may cause the adapter parameters to return to their default values. Before upgrading, you may need to save the configuration using the HIM CopyCat feature, DriveExplorer, or DriveExecutive. 4. Expand the tree view of the communication path you are using, and then select the drive icon representing the drive of the 20-COMM-E adapter you are updating. Then click OK. 5. With the "Multiple Assemblies Found" window displayed, select "Port X-20-COMM-E" from the list, and then click "OK". 6. With the Firmware Revision window displayed, select "4.001.xx Complete" from the list of available updates, and then click Next>. Follow the remaining screen prompts until the flash process is complete and the new firmware version (v4.001) is displayed.
