VMIVME-1182VMIVME-2511備件庫存
整體保持制動器
（選項-Ax或-Kx）當目錄號包含后綴“-Ax”（90V DC輸入）或“-Kx”（24V DC輸入）時，1326AB伺服電機包含整體保持制動器。制動器為盤式制動器，在斷電時彈簧固定。制動器設計用于將負載保持在靜止?fàn)顟B(tài)，并為緊急停止提供有限的制動扭矩。制動器不能用作定位制動器（制動器齒隙最大值為0.8弧分），也不能連續循環以幫助停止負載。當用作停車制動器時，制動器的通電/斷電不得超過每小時90次。駐車制動器僅用于固定負載，不用于停止電機運動，除非發生電源中斷。有關更多信息，請參閱表B和公告1391說明手冊。
保持制動數據
電機目錄號1326AB-A-11、21 1326AB-B-11、21 132 6AB-C-11、21保持扭矩lb.-in。（N-m）72（8.1）120（13.6）400（45.1）通電制動響應時間吸合/釋放時的電流消耗120ms/20ms 150ms/25ms 120ms/30ms重量加至電機重量lbs.（kg）3.0（1.36）9.0（4.08）13.0（5.90）耐寒慣性加至電機慣性lb.-in-s2（kg-cm-s2）0.001（0.001）0.0027（0.0031）0.0046（0.0053）-Ax（90V）0.26A 0.37A 0.32A-Kx（24V）0.88A 1.20A 1.20A-Ax（90 V）382歐姆270歐姆306歐姆-Kx（24 V）28歐姆21歐姆21歐姆90V DC制動器（1326-MOD-BPS）制動電源將120V AC轉換為90V DC制動所需的電壓。一個電源最多可連接四個制動器。但是，如果需要對多個電機進行獨立控制，則必須為每個電機使用一個電源。
Overall holding brake
(Option - Ax or - Kx) When the catalog number contains the suffix "- Ax" (90V DC input) or "- Kx" (24V DC input), the 1326AB servo motor contains an integral holding brake. The brake is a disc brake, and the spring is fixed when the power is off. The brake is designed to hold the load at rest and provide limited braking torque for emergency stop. The brake cannot be used as a positioning brake (maximum brake backlash is 0.8 minutes of arc), nor can it be cycled continuously to help stop the load. When used as a parking brake, the brakes must not be energized/de energized more than 90 times per hour. The parking brake is only used to fix the load, not to stop the motor movement, unless the power supply is interrupted. For more information, refer to Table B and Bulletin 1391 Instruction Manual.
Keep braking data
Motor catalog numbers 1326AB-A-11, 21 1326AB-B-11, 21 132 6AB-C-11, 21 holding torque lb. - in. (N-m) 72 (8.1) 120 (13.6) 400 (45.1) Current consumption when the response time of energized braking is engaged/released 120ms/20ms 150ms/25ms 120ms/30ms weight is added to the motor weight lbs. (kg) 3.0 (1.36) 9.0 (4.08) 13.0 (5.90) Cold resistant inertia is added to the motor inertia lb.in-s2 (kg-cm-s2) 0.001 (0.001) 0.0027 (0.0031) 0.0046 (0.0053) - Ax (90V) 0.26A 0.37A 0.32A-Kx (24V) 0.88A 1.20A 1.20A 1.20A-Ax (90V) 382 ohm 270 ohm 306 ohm Kx (24 V) 28 ohm 21 ohm 21 ohm 90V DC Brake (1326-MOD-BPS) Brake power converts 120V AC to the voltage required for 90V DC braking. Up to four brakes can be connected to one power supply. However, if independent control of multiple motors is required, one power supply must be used for each motor.
