VMIPCI-5565-0000控制模塊
輸出函數輸出
類型類別。編號待感測物體偏振反光透明物體檢測待感測漫反射物體待感測銳截止漫反射物體需感測物體背景背景抑制自動化出版物年月光電傳感器圖玻璃纖維光纜傳感器用戶界面綠色狀態指示器可以也用作設置對齊指示。已達到。傳感器至少接收到。乘以觸發輸出信號所需的從目標返回的信號強度。通常期望具有更高的裕度以幫助克服任何惡化的環境條件即傳感器透鏡上的灰塵積聚。當對準傳感器時如果在目標就位的情況下點亮該裕度指示器則可以獲得最佳性能。對齊漫射模式傳感器時確保靈敏度設置為最大設置使用前面板上的單圈調節旋鈕。向左向右向上和向下平移傳感器使光束對準目標。減小此設置以防止傳感器檢測到背景對象。
應用程序
如果此問題仍然存在則應用程序需要使用背景抑制銳截止漫射或回射傳感模式。 可見光紅色取決于接收器發射器 紅外 直流可見光紅色 亮操作和 暗操作亮操作和暗操作 紅外光操作 暗操作 ？直流可見紅 亮操作和 深色操作淺色和深色操作 紅外光操作 深色操作 紅外線取決于光纖單旋鈕淺色操作 深色操作淺色和黑色操作 暗操作推薦標準針 快速斷開線組推薦標準引腳 快速斷開線組建議標準針 快速斷線組連接選項：后綴描述型號和描述了用于型號的 長電纜上的針微型快速斷開連接器。對于其他連接選項對于沒有快速斷開連接的電纜例如將或后綴替換為：表示針微微快速斷開連接例如。此選項僅適用于非激光型號。可用于某些型號。有關更多產品選擇信息請?jiān)L問。
Output Function Output
Type category. No. Object to be sensed Polarized reflective transparent object Detection of diffuse reflective object to be sensed Sharp cut-off diffuse reflective object Object to be sensed Background suppression of object to be sensed Automatic publication Lunar optoelectronic sensor Figure Glass fiber optic cable sensor User interface Green status indicator can also be used as setting alignment indication. Has reached. The sensor at least receives. Multiply the signal strength returned from the target required to trigger the output signal. It is usually desirable to have a higher margin to help overcome any deteriorating environmental conditions, i.e. dust accumulation on the sensor lens. When the sensor is aligned, the best performance can be achieved if the margin indicator is lit when the target is in place. When aligning the diffuse mode sensor, make sure the sensitivity is set to the maximum setting using the single turn adjustment knob on the front panel. Translate the sensor to the left, right, up and down to aim the beam at the target. Reduce this setting to prevent the sensor from detecting background objects.
application program
If this problem persists, the application needs to use the background suppression sharp cutoff diffuse or retroreflective sensing mode. Visible light red depends on the receiver transmitter infrared DC visible light red bright operation and dark operation bright operation and dark operation infrared light operation dark operation? DC visible red light operation and dark color operation Light color and dark color operation Infrared light operation Dark color operation Infrared depends on optical fiber single knob Light color operation Dark color operation Light color and black operation Dark color operation Recommended standard pin quick disconnect group Recommended standard pin quick disconnect group Recommended standard pin quick disconnect group Connection options: suffix describes the model and describes the pin micro quick disconnect connector on the long cable used for the model. For other connection options, for cables without quick disconnection, for example, replace the or suffix with: indicates that the pin is slightly quick disconnection, for example. This option is only available for non laser models. Available on some models. For more product selection information, visit.
