EMERSON A6120 工控模塊機器人備件
機械連接類型?彈簧加載可拆卸接線板?2 x RJ45（僅連接到燈陣列）?僅CAN型號：用于CAN通信的兩個額外RJ45連接器材料外殼ABS（FR）UL94-V0蓋聚碳酸酯附件所需附件45MLA燈陣列（類別號45MLA-xxxxx0Pxx）。請參見第11頁的附件。注意：這些設備僅用于物體識別，不得用于保護人身（進入保護）。警察的唯一目的是偵察目標，并利用人類保護（保護行動）最高環境溫度：55°C（131°F）環境溫度最高：55°F（131°C）注意：必須使用提供的索環安裝電纜，以保持IP54標準。不得在安裝環境中擠壓電纜或?qū)﹄娎|施加機械應力。2羅克韋爾自動化出版物45MLA-IN002C-EN-P-2020年8月45MLA控制器安裝說明安裝說明本裝置可安裝在DIN導軌上，安裝支架位于背面，或四個螺釘穿過從外殼角部延伸的凸耳上的孔。為了減少電磁干擾的影響，請確認沒有連接電纜靠近高功率或高頻電路電纜。電氣配置控制器單元包含控制燈陣列電子器件的主
PCBMechanical Connection types ? Spring loaded removable terminal strips ? 2 x RJ45 (connection to light arrays only) ? CAN model only: Two additional RJ45 connectors for CAN comms Material Housing ABS (FR) UL94-V0 Cover Polycarbonate Accessories Required accessories 45MLA light arrays (Cat. No. 45MLA-xxxxx0Pxx). See Accessories on page 11. ATTENTION: ? These devices are intended for object recognition only and may not be used for protection of humans (access protection). Ces appareils sont uniquement destinés à la reconnaissance d'objets et ne peuvent pas être utilisés pour la protection des humains (protection d'accès). ? Maximum ambient temperature: 55 °C (131 °F) Température ambiante maximale: 55 °C (131 °F) ATTENTION: The cables must be mounted using the provided grommets to maintain IP54 standards. Do not allow the cables to be pinched or mechanically stressed in the mounted environment. 2 Rockwell Automation Publication 45MLA-IN002C-EN-P - August 2020 45MLA Controller Installation Instructions Mounting Instructions This unit can be mounted on a DIN rail either with the mounting brackets on the back or four screws through the holes on the tabs that extend from the corners of the housing. To reduce the influences of electromagnetic disturbances, verify that none of the connecting cables are lying next to high power or high frequency circuit cables. Electrical Configuration The controller unit contains a main PCB that controls light array electronics
