TRICONEX 3806E 工控模塊備件
鏡頭或光纖電纜的選擇。注意：應根據ANSI/ISA-RP 12.6和其他適用規范和標準在危險環境位置進行安裝。注意：必須遵守這些參數。否則，可能會對人身或財產造成傷害。2羅克韋爾自動化出版物42DR-IN001B-EN-P-2016年5月本質安全傳感器?輸入靈敏度可調。?射頻干擾保護。?無虛假開啟脈沖。?同步檢測電路避免環境干擾。?亮或暗操作的開關選擇。?雙開路集電極輸出提供電流吸收器（NPN）和電流源（PNP）功能最大負載電壓29.5 V DC–最大負載電流20 mA?響應時間：1 ms?狀態指示器校準：360°可見?NEMA 4X耐腐蝕、高沖擊外殼。?UL認證。為什么在使用“防爆”外殼的危險環境中的工廠和設施中，本質安全防爆是首要考慮因素?！胺辣蓖鈿は到y(tǒng)的主要缺點是，一個人為錯誤可能會產生輕微的爆炸概率。例如，未能緊密更換“防爆”外殼上的蓋子、未能在拆除此類外殼的蓋子之前關閉電源，以及損壞此類蓋子的機加工表面等都是主要的例子。本質安全系統現在被認為是在爆炸環境中提供自動控制功能的更理想的方法。該技術依賴于電子電路的固有參數，因此在正常或異常操作條件下，不會釋放出足以點燃
choice of lens or Fiber Optic Cable. ATTENTION: Installation in hazardous environment locations shall be made according to ANSI/ISA-RP 12.6 and other applicable codes and standards. ATTENTION: These parameters must be adhered to. If not, injury may be caused to person or property. 2 Rockwell Automation Publication 42DR-IN001B-EN-P - May 2016 Intrinsically Safe Sensor ? Adjustable input sensitivity. ? RF interference protected. ? No false turn-on pulse. ? Synchronous detection circuitry avoids ambient interference. ? Switch selection for light or dark operation. ? Dual open collector outputs provide current sink (NPN) and current source (PNP) capabilities. – Load voltage 29.5 V DC maximum – Load current 20 mA maximum ? Response time: 1 ms ? Status indicator alignment: visible 360° ? NEMA 4X corrosion resistant, high impact housing. ? UL Listed. Why Intrinsically Safe Explosion prevention is a prime consideration in plants and facilities containing hazardous atmospheres where “explosion-proof ” housings are used. The main fault with the “explosion-proof ” housing system is that a single human error could create a light explosion probability. Such occurrences as, failing to tightly replace covers on “explosion-proof ” housings, failing to shut off the power before removing the cover of such a housing, and damaging the machined surfaces of such covers are all prime examples. Intrinsically Safe systems are now recognized as a more highly desirable means of providing automated control functions in explosive environments. The technique relies on the inherent parameters of electronic circuits, so that no energy can be released under normal or abnormal operating conditions, of sufficient magnitude to ignite a
