MVME320B-1輸出卡件
DriveWindow作為遠程OPC服務器的客戶端，安裝后即可使用。遠程端需要在遠程端PC中安裝DriveOPC或另一個DriveWindow（包括DriveOPC）。此外，需要配置遠程端，以便客戶端可以訪問遠程PC、啟動DriveOPC和訪問DriveOPC。為遠程使用配置DriveOPC超出了本文檔的范圍。另請參閱：DriveOPC什么是OPC服務器連接到OPC服務器遠程連接高級信息10-6 DriveWindow 2 2.2幾個客戶端盡管不需要在本地運行幾個DriveWindow實例，但可能有其他應用程序，您希望能夠同時使用本地DriveOPC。由于DriveWindow將DriveOPC（SMP.DLL或SMP.EXE）的選擇委派給操作系統，因此將選擇進程內（DLL）版本。這意味著不可能從多個客戶端同時進行通信。根據您的操作系統及其配置方式，可以“遠程”使用本地服務器（EXE）版本。通常，遠程連接到\\localhost或127.0.0.1實際上連接到同一臺PC中的本地服務器。當然，所有客戶端都必須能夠進行遠程連接。另一種方法是對注冊表進行更改，以便進程內（DLL）版本不再使用。然后，操作系統必須選擇本地服務器（EXE）版本，然后由使用DriveOPC的所有應用程序在本地共享。甚至DriveWindow也將使用EXE版本。注意，本地服務器（EXE）版本固有地比進程內（DLL）版本慢。因此，除非絕對必要，我們不建議強制使用本地服務器（EXE）版本。如果可能，如果不再需要強制使用本地服務器（EXE）版本，進程中（DLL）版本應重新使用。這是通過恢復注冊表中的原始值來完成的。在對DriveOPC進行任何注冊表更改之前，請停止使用它的所有程序。進行注冊表更改有兩種方法：?使用注冊表編輯器編輯注冊表?使用服務器的自動注冊和注銷功能如果DriveOPC版本為2.02（包括在DriveWindow 2.01中）或更高版本，則可以使用后一種方法。高級信息驅動窗口2 10-7 2.2.1編輯注冊表啟動您喜愛的注冊表編輯器（例如RegEdit.exe）。UAC可能會請求您的許可繼續。高級信息10-8 DriveWindow 2搜索SMP.DLL（在數據中）。如有必要，重復，直到鍵InprocServer32的默認值中包含SMP.DLL（前面有路徑）。將InprocServer32密鑰重命名為，例如，InprocServer32.bak。高級信息DriveWindow 2 10-9在此更改后，所有在本地使用DriveOPC的應用程序?qū)⑹褂帽镜胤?wù)器（EXE），而不是進程內服務器（DLL）。2.2.2使用自動注冊功能如果DriveOPC版本為2.02（包括在DriveWindow 2.01中）或更高版本，則這是首選方法。
DriveWindow acting as a client for a remote OPC Server is ready for use after installation. The remote end requires that DriveOPC or another DriveWindow (includes DriveOPC) is installed in the remote end PC. In addition, the remote end needs to be configured, so that clients can access the remote PC, can launch DriveOPC, and can access DriveOPC. Configuring DriveOPC for remote use is out of scope of this document. See Also: DriveOPC What is OPC Server Connecting to OPC Server Remote Connection Advanced Information 10-6 DriveWindow 2 2.2 Several Clients Although there is no need to run several instances of DriveWindow locally, there may be other applications, which you want to be able to use the local DriveOPC simultaneously. Because DriveWindow delegates the selection of DriveOPC (SMP.DLL or SMP.EXE) to the operating system, the in-process (DLL) version will be selected. It means that simultaneous communication from several clients is not possible. Depending on your operating system and how it is configured, it may be possible to use the local server (EXE) version “remotely”. Typically, connecting remotely to \\localhost or 127.0.0.1, actually connects to the local server in the same PC. Of course, all clients must then be able to do remote connection. Another way is to make changes to the registry, so that the in-process (DLL) version is taken out of use. Then the operating system has to select the local server (EXE) version, which is then shared by all applications using DriveOPC locally. Even DriveWindow will use the EXE version then. Note that the local server (EXE) version is inherently slower than the in-process (DLL) version. So, we do not recommend forcing the use of the local server (EXE) version unless absolutely necessary. If possible, the in-process (DLL) version should be taken back in use, if the forcing the use of the local server (EXE) version is not needed any more. It is done by restoring back the original values in the registry. Before making any registry changes concerning DriveOPC, stop all programs using it. There are two methods of making registry changes: ? Editing the registry with a registry editor ? Using self-registering and unregistering features of the servers The latter method can be used if DriveOPC version is 2.02 (included in DriveWindow 2.01) or newer. Advanced Information DriveWindow 2 10-7 2.2.1 Editing Registry Start your favourite registry editor (RegEdit.exe, for example). UAC may ask your permission to continue. Advanced Information 10-8 DriveWindow 2 Search for SMP.DLL (in data). If necessary, repeat, until the key InprocServer32 having SMP.DLL (preceded by path) in its default value. Rename the InprocServer32 key to, for example, InprocServer32.bak. Advanced Information DriveWindow 2 10-9 After this change all applications, which use DriveOPC locally, will use the local server (EXE) instead of the in-process server (DLL). 2.2.2 Using Self-Registering Features This is the preferred method if DriveOPC version is 2.02 (included in DriveWindow 2.01) or newer.
