MVME172PA-644LE工控DCS系統備件
連續流動的電源和制動電纜符合RoHS和NFPA-79托盤額定值，由UL認證的散裝電纜組成。護套顏色符合DESINA規范。電機附件軸封套件適用于MP系列低慣量電機的所有框架尺寸。如果安裝正確，密封件在軸上的防護等級為IP66。注意，軸封是需要定期更換的易損件。請參閱《運動控制選擇指南》，為您的特定電機選擇軸封套件。大多數MP系列電機可使用電機端連接器套件?？蛻暨x擇自己制造電纜時使用這些電纜。該套件采用金屬后殼，壓縮式密封電纜護套，并根據套件采用焊接式或壓接式連接器插座。羅克韋爾自動化公司為壓接式插座提供壓接工具。有關更多信息，請訪問我們的網站www.ab.com/motion或Kinetix選擇指南GMC-SG001x。Allen-Bradley和Kinetix是羅克韋爾自動化的注冊商標。
SERCOS接口是德國斯圖加特Interest Group SERCOS interface e.V的商標。電纜可用于MP系列電機和其他Allen-Bradley電機以及帶有DIN型連接器的致動器。MatGuard壓敏安全墊系統安裝和用戶手冊安裝前請完整閱讀本手冊安裝后，應將本手冊保存在安全、易接近的地方R 1 2 MatGuard-壓敏安全墊安裝和使用手冊第1節存儲和搬運第4頁第2節系統說明第5頁第3節應用第8頁第4節規范第10頁第5節安裝設計第14頁第6節安裝和調試第26頁第7節使用第36頁第8節維護第37頁傳感器墊標記本手冊參考了以下標準：EN 292-1和2：機械安全-基本概念-一般設計原則-第1和2部分EN 294：機械安全–防止的安全距離上肢觸及的危險區域。EN 811：機械安全-防止下肢觸及危險區域的安全距離。
Continuous flow power and brake cables comply with RoHS and NFPA-79 tray ratings and consist of UL certified bulk cables. Sheath color shall conform to DESINA specification. The motor accessory shaft seal kit is applicable to all frame dimensions of MP series low inertia motors. If installed correctly, the protection class of the seal on the shaft is IP66. Note that the shaft seal is a wearing part that needs to be replaced regularly. Refer to the Motion Control Selection Guide to select a shaft seal kit for your specific motor. The motor end connector kit is available for most MP series motors. These cables are used when customers choose to make their own cables. The kit uses a metal back shell, a compression sealed cable sheath, and a welded or crimped connector socket according to the kit. Rockwell Automation provides crimping tools for crimping sockets. For more information, please visit our website at www.ab.com/motion or Kinetix Selection Guide GMC-SG001x. Allen Bradley and Kinetix are registered trademarks of Rockwell Automation.
SERCOS interface is a trademark of the Interest Group SERCOS interface e.V in Stuttgart, Germany. Cables can be used for MP series motors and other Allen Bradley motors as well as actuators with DIN type connectors. Please read this manual completely before installing the MatGuard pressure-sensitive safety pad system and the user manual. After installation, this manual should be kept in a safe Accessible places R 1 2 MatGuard Pressure Sensitive Safety Pad Installation and Use Manual Section 1 Storage and Handling Page 4 Section 2 System Description Page 5 Section 3 Application Page 8 Section 4 Specifications Page 10 Installation Design Page 14 Section 6 Installation and Commissioning Page 26 Section 7 Use Page 36 Section 8 Maintenance Page 37 Sensor Pad Marking This manual refers to the following standards: EN 292-1 and 2: Mechanical Safety - Basic Concepts - General Design Principles - Part 1 and 2 EN 294: Safety of machinery – safe distance to prevent danger areas touched by upper limbs. EN 811: Safety of machinery - Safety distances to prevent lower limbs from reaching hazardous areas.
