MVME172-243自動化模塊備件
“X”表示觸點閉合，“O”表示觸點斷開。表中使用了X和O符號，以幫助選擇組合電路中的正確接觸塊，以滿足功能要求。兩個獨立的因素決定了觸點在給定位置是打開還是關閉。1.觸點的“架”狀態為常開（a觸點）或常閉（B觸點）。2.在給定開關位置，白色（W）或黑色（B）執行器下方的凸輪位置。注意，在第9頁的表2中，標準選擇開關（凸輪代碼“KB7”）的目標表以及凸輪代碼“KA1”和“KA7”是相同的，無論接觸塊安裝在白色執行器還是黑色執行器后面。凸輪代碼“KC1”、“KC7”和“KD7”具有所有六種觸點組合。每個標準和旋鈕操縱桿操作員在工廠裝配有一個白色插件。機翼操縱桿操作員為標準灰色。如果在工廠訂購10個或更多裝置，則可提供其他顏色。對于標準和旋鈕操縱桿操作員，請從下表中選擇一個顏色代碼字母。在列出的目錄號中破折號后的第一個字母后插入顏色代碼字母。例如，帶有綠色插入件的800T-J2KA1將變?yōu)?00T-JB2KA1。代碼字母顏色紅色、綠色、藍色、黃色ABCE對于紅色翼?xiàng)U操縱器（僅提供灰色或紅色），將字母“G”替換為字母“a”。要訂購未安裝彩色嵌件的標準或旋鈕操縱桿，請?jiān)谒心夸浱?hào)破折號后的第一個字母后添加字母“X”。
包含其中一個的特殊包裝不收取額外費用。目標表特殊顏色公告800T油密選擇開關產品數據17選擇特殊照明選擇開關與選擇特殊非照明選擇開關類似。然而，照明設備的接觸塊只能安裝在白色致動器后面。照明設備上的燈的電源模塊必須安裝在設備的黑色側后面。因此，照明設備具有2位模塊后綴代碼，而非照明設備具有4位代碼。示例：800T-16JR2KB7AX工業控制目錄中列出的照明選擇開關的后綴代碼可以修改，以實現特殊的觸點布置?？梢允褂锰厥獾难b置，允許一個電路的觸點在第二個電路的觸頭斷開之前閉合。由于這些選擇器開關可能被誤用，因此未在工業控制目錄中列出。如果您的應用程序需要重疊凸輪，請聯系最近的Allen-Bradley銷售辦公室。照明選擇開關重疊凸輪公告800T油密選擇開關產品數據18注釋公告800T油密選擇開關數據19注釋公告1403-5.0–1996年12月羅克韋爾自動化公司Allen Bradley 90多年來一直在幫助客戶提高生產力和質量。我們?cè)谌蚍秶鷥?nèi)設計、制造和支持各種自動化產品。它們包括邏輯處理器、電源和運動控制設備、操作員接口、傳感器和各種軟件。羅克韋爾是世界領先的科技公司之一。全球代表。
"X" indicates that the contact is closed, and "O" indicates that the contact is open. The X and O symbols are used in the table to help select the correct contact block in the combined circuit to meet the functional requirements. Two independent factors determine whether the contact is open or closed at a given position. 1. The "rack" state of the contact is normally open (a contact) or normally closed (B contact). 2. Cam position under white (W) or black (B) actuator at given switch position. Note that in Table 2 on page 9, the target table of the standard selector switch (cam code "KB7") and the cam codes "KA1" and "KA7" are the same, regardless of whether the contact block is installed behind the white actuator or the black actuator. Cam codes "KC1", "KC7" and "KD7" have all six contact combinations. Each standard and rotary lever operator is factory equipped with a white insert. The wing joystick operator is standard gray. Other colors are available if 10 or more units are ordered at the factory. For standard and rotary lever operators, select a color code letter from the following table. Insert the color code letter after the first letter after the dash in the listed catalog number. For example, 800T-J2KA1 with green inserts will become 800T-JB2KA1. Code letter colors Red, green, blue, yellow ABCE For red wing lever manipulators (only available in gray or red), replace the letter "G" with the letter "a". To order a standard or rotary lever without color inserts, add the letter "X" after the first letter after the dash of the catalog number listed.
There is no extra charge for special packaging containing one of them. Target Table Special Color Bulletin 800T Oil Tight Selector Switch Product Data 17 Selecting a special lighting selector switch is similar to selecting a special non lighting selector switch. However, the contact block of the lighting fixture can only be mounted behind the white actuator. The power module of the lamp on the lighting fixture must be installed behind the black side of the fixture. Therefore, lighting fixtures have a 2-digit module suffix code, while non lighting fixtures have a 4-digit code. Example: The suffix code of the lighting selector switch listed in the 800T-16JR2KB7AX industrial control directory can be modified to achieve special contact arrangement. Special devices may be used to allow the contacts of one circuit to close before the contacts of the second circuit are opened. These selector switches are not listed in the industrial control catalogue because they can be misused. If your application requires overlapping cams, contact the nearest Allen Bradley sales office. Lighting Selector Switch Overlap Cam Bulletin 800T Oil Tight Selector Switch Product Data 18 Annotation Bulletin 800T Oil Tight Selector Switch Data 19 Annotation Bulletin 1403-5.0 – December 1996 Allen Bradley of Rockwell Automation has been helping customers improve productivity and quality for more than 90 years. We design, manufacture and support automation products worldwide. They include logic processors, power and motion control devices, operator interfaces, sensors, and various software. Rockwell is one of the world's leading technology companies. Global Representative.
