MVME162PA-252LSE工控DCS系統備件
除所有適用的法規和標準的要求外，用戶還需要熟悉安裝和接線說明。包括安裝調整投入使用組裝拆卸和維護在內的活動需要由經過適當培訓的人員按照適用的實踐規范進行。如果以制造商未規定的方式使用本設備，則設備提供的保護可能會受損。在任何情況下，羅克韋爾自動化股份有限公司均不對因使用或應用本設備而導致的間接或后果性損害負責。本手冊中的示例和圖表僅用于說明目的。由于與任何特定安裝相關的許多變量和要求，羅克韋爾自動化股份有限公司無法根據示例和圖表承擔實際使用的責任。羅克韋爾自動化股份有限公司對本手冊中所述的信息電路設備或軟件的使用不承擔任何專利責任。未經羅克韋爾自動化股份有限公司書面許可，嚴禁復制本手冊的全部或部分內容。.觸點的“架”狀態為常開觸點或常閉觸點。.在給定開關位置，白色或黑色執行器下方的凸輪位置。注意，在第頁的表中，標準選擇開關凸輪代碼的目標表以及凸輪代碼和是相同的，無論接觸塊安裝在白色執行器還是黑色執行器后面。凸輪代碼和具有所有六種觸點組合。每個標準和旋鈕操縱桿操作員在工廠裝配有一個白色插件。機翼操縱桿操作員為標準灰色。如果在工廠訂購個或更多裝置，則可提供其他顏色。對于標準和旋鈕操縱桿操作員，請從下表中選擇一個顏色代碼字母。在列出的目錄號中破折號后的第一個字母后插入顏色代碼字母。例如，帶有綠色插入件的將變?yōu)?。代碼字母顏色紅色綠色藍色黃色對于紅色翼?xiàng)U操縱器僅提供灰色或紅色，將字母替換為字母。若要訂購未安裝彩色嵌件的標準或旋鈕桿操作器，請?jiān)谒心夸浱?hào)破折號后的第一個字母后添加字母。包含其中一個的特殊包裝不收取額外費用。目標表特殊顏色公告油密選擇開關產品數據選擇特殊照明選擇開關與選擇特殊非照明選擇開關類似。然而，照明設備的接觸塊只能安裝在白色致動器后面。
In addition to the requirements of all applicable codes and standards, users need to be familiar with the installation and wiring instructions. Activities including installation, adjustment, putting into use, assembly, disassembly and maintenance shall be carried out by appropriately trained personnel in accordance with applicable codes of practice. If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be damaged. Under no circumstances shall Rockwell Automation Co., Ltd. be liable for indirect or consequential damages caused by the use or application of this equipment. The examples and diagrams in this manual are for illustrative purposes only. Due to the many variables and requirements associated with any particular installation, Rockwell Automation Inc. cannot assume responsibility for actual use based on examples and diagrams. Rockwell Automation Co., Ltd. assumes no patent liability for the use of information circuit equipment or software described in this manual. Reproduction of this manual in whole or in part is strictly prohibited without the written permission of Rockwell Automation Co., Ltd The "rack" state of the contact is normally open or normally closed Cam position below the white or black actuator at a given switch position. Note that in the table on page, the target table of the cam code of the standard selector switch and the cam code and are the same, regardless of whether the contact block is installed behind the white actuator or the black actuator. Cam codes and have all six contact combinations. Each standard and rotary lever operator is factory equipped with a white insert. The wing joystick operator is standard gray. Other colors are available if units or more are ordered at the factory. For standard and rotary lever operators, select a color code letter from the following table. Insert the color code letter after the first letter after the dash in the listed catalog number. For example, with a green insert, becomes. The code letter color red green blue yellow is only available in gray or red for red wing lever manipulators, replace the letter with a letter. To order standard or rotary lever operators without color inserts, add a letter after the first letter after the dash of the catalog number listed. There is no extra charge for special packaging containing one of them. Special color announcement of target table Oil tight selector switch Product data selection Special lighting selector switch is similar to special non lighting selector switch. However, the contact block of the lighting fixture can only be mounted behind the white actuator.
