MVME162-432機械備件
表示顯示的行參見第頁的圖。按下重要提示適用于以太網固件版本為及更高版本的裝置。年月通信第章在應用程序中添加新模塊時，安裝文件后，模塊將顯示在目錄號下。要使用附加模塊配置文件，請執行以下步驟。選擇的目錄號，然后單擊創建。輸入電源監視器的名稱和地址。單擊模塊定義下的更改。模塊定義窗口打開。默認情況下，第一個連接設置為僅輸入。年月第章通信單擊連接名稱單元格打開第一個連接可用選項的下拉菜單。表可用連接連接名稱描述數據訪問模塊定義的數據類型大小字節標記后綴僅輸入產品信息組件實例讀取:僅偵聽僅輸入實時電壓和電流讀取:僅偵聽:僅輸入實時功率，頻率讀取:只偵聽:僅輸入最大電壓和電流讀取:[:只偵聽:僅輸入最大功率，頻率讀取:僅偵聽:僅輸入所需電壓和電流讀取:[:只偵聽，頻率讀取:僅偵聽:僅輸入能量讀取:[:只偵聽:僅輸入報警和輸出狀態讀取:[號]:僅偵聽:在僅輸入時使用僅偵聽連接與另一個控制器存在連接。其中是模塊定義中配置的連接號。年月通信第章要選擇多個輸入實例，請單擊名稱列下的下一個可用單元格，打開下拉選擇列表并選擇所需的連接。最多可以從表所示的選項中選擇九個連接。選擇連接后，單擊確定。單擊是更改模塊定義。年月第章通信在連接上輸入所需的請求分組間隔。默認為。請勿為裝置輸入小于的。單擊確定創建模塊。創建模塊時，將為在模塊定義中選擇的每個連接名稱生成控制器標記。年月通信第章在本示例中，為實例和創建控制器標簽。僅輸入連接不需要存在獨占所有者連接。僅輸入連接允許您使用顯示器通信或軟件配置工具配置電源監視器。通用以太網模塊輸入數據連接具有通信的單元支持到九個組件實例的類連接。要使用控制器配置到選定部件實例的連接，請執行以下步驟。在應用程序中脫機打開控制器程序如果使用的是控制器，則在程序模式下聯機。在配置樹中，右鍵單擊以太網通信模塊例如，然后選擇新建模塊。從通信下拉菜單中選擇以太網模塊通用以太網模塊。標記后綴連接編號模塊定義連接組件實例控制器標記創建的模塊定義數據類型創建的僅輸入:僅輸入:僅輸入:[編目號]:輸入標記由和一位組成，用于監視與設備的連接。年月第章通信輸入此對話框中列出的設置參數，并在表中進行說明。
The displayed rows are shown in the figure on page. Press Important for devices with Ethernet firmware version and later. When a new module is added to the application program in the chapter of the month and month communication, the module will be displayed under the directory number after installing the file. To use an add in profile, perform the following steps. Select the catalog number of and click Create. Enter the name and address of the power monitor. Click Change under Module Definition. The module definition window opens. By default, the first connection is set to input only. Month Month Chapter Communication Click the connection name cell to open the drop-down menu of the available options for the first connection. Table The connection name can be used to describe the data type size defined by the data access module Byte tag suffix Only input product information Component instance reading: Only listen Only input real-time voltage and current Reading: Only listen: Only input real-time power, Frequency reading: only listen: only input the maximum voltage and current reading: [: only listen: only input the maximum power, frequency reading: only listen: only input the required voltage and current reading: [: only listen, frequency reading: only listen: only input energy reading: [: only listen: only input the alarm and output status reading: [number]: only listen: only use the only listen connection to have a connection with another controller when only input. Where is the connection number configured in the module definition. In the chapter of Monthly Communication, to select multiple input instances, click the next available cell under the name column, open the drop-down selection list, and select the required connection. You can select up to nine connections from the options shown in the table. After selecting a connection, click OK. Click Yes to change the module definition. The required request packet interval shall be input on the connection in Chapter Communication. The default is. Do not enter less than for the device. Click OK to create the module. When you create a module, a controller tag is generated for each connection name selected in the module definition. Month Month Communication Chapter In this example, create a controller label for the instance and. Input only connections do not require an exclusive owner connection. Input only connections allow you to configure the power monitor using monitor communications or software configuration tools. Universal Ethernet module input data connection The unit with communication supports class connection to nine component instances. To configure a connection to a selected assembly instance using a controller, perform the following steps. Open the controller program offline in the application If you are using a controller, you are online in program mode. In the configuration tree, right-click Ethernet communication module, for example, and select New Module. Select Ethernet moduleUniversal Ethernet module from the Communications drop-down menu. Tag suffix connection number module definition connection component instance controller tag created module definition data type created input only: input only: input only: [catalog number]: input tag consists of and, used to monitor the connection with the device. Enter the setting parameters listed in this dialog box and describe them in the table.
