MVME162-010工控備件模塊
環境溫度環境溫度[A]額定電源電流取決于溫度40°C[A]無吸50°C[A]Ie過載保護章程IEC 60947-4-1電機保護（類別號-C2N、-D8N、-F8N除外）IEC 60947環境溫度補償[°C]-20+60相損耗保護差動脫扣器10級（類別號-C2N、-D8N、-F8N除外）固定設置10磁釋放釋放電流（+/-20%）固定設置1314 x Ie最大設置范圍值固定設置14 x Ie最高總功率損耗Pv斷路器在額定負載工作溫度[W]611.5 611.6 916 33主隔離開關應用是，帶附件應用條件適用于北美以外地區，（產品）組件應符合IEC 61439-1的要求，手動電機起動器適用于無粉塵、爆炸性或腐蝕性氣體等危險操作條件的封閉區域。需要采用適當方式的外殼，以保護此類環境中的設備。公告電機保護斷路器和電機電路保護器2-46.ab./目錄首選可用目錄。編號為粗體。出版物A117-CA001A-EN-P！公告電機保護斷路器通用數據的規范附件，前安裝的連續輔助控制塊-C-AFA，右側安裝的C-AFAR輔助控制塊C-ASA，-C-ASAR額定熱電流Ith，環境溫度40°C，環境溫度60°C，符合NEMA（UL/CSA標準）端子零件端子類型螺絲刀Pozidriv 2號/刀片編號公告電機保護斷路器和電機電路保護器2-47.ab./目錄首選可用類別。編號為粗體。出版物A117-CA001A-EN-P！左側安裝的規范欠壓跳閘-左側安裝的帶2個輔助觸點的C-UX欠壓跳閘–左側安裝的C-UC并聯跳閘-C-SN驅動電壓引入壓降0.851.1 x Us 0.70.35 x Us 0.851.1×Us 0.70.35 x Us 0.71.1 x Us額定控制電壓最小值最大值21V 50 Hz，24V 60 Hz 600V 50 Hz 21V 50赫茲，24V 60 Hz 600V 50 Hz準時端子零件端子類型用于公告電機保護斷路器的螺絲刀Pozidriv配件，連續pt母線饋線端子pt母線pt母線饋線塊60°C環境溫度下額定熱電流Ith公告電機保護電路斷路器和電機電路保護器2-48.ab./目錄首選可用目錄。編號為粗體。出版物A117-CA001A-EN-P！規格重量公告電機保護斷路器和電機電路保護器2-49.ab./目錄首選可用目錄。編號為粗體。出版物A117-CA001A-EN-P！規范140-CT跳閘控制塊，用于斷路器上的齊平安裝，欠壓跳閘和并聯跳閘，用于斷路斷路器上齊平安裝額定熱電流Ith高達40°C環境溫度高達60°C環境電壓的欠壓跳閘裝置，用于右側安裝在斷路器上，并聯跳閘用于斷路器工作電壓的齊平拾取線圈性能拾取引出端子端子類型細股擰緊力矩粗股擰緊力矩公告電機保護斷路器和電機電路保護器2-50.ab./catalogs首選可用類別。編號為粗體。出版物A117-CA001A-EN-P！
ambient temperature ambient temperature [A] Rated Supply Current Dependence on Temperature 40 °C [A] no uction 50 °C [A] no uction no uction current uction of the upper rated current Ie Overload Protection Charteristics IEC 60947-4-1 Motor protection (except Cat. Nos. -C2N, -D8N, -F8N) IEC 60947 Ambient Temperature pensation [°C] -20 +60 Phase-loss Protection Differential release Trip class 10 (except Cat. Nos. -C2N, -D8N, -F8N) fixed setting 10 Magnetic Release Release current (+/-20 %) fixed setting 1314 x Ie max. values of setting ranges fixed setting 14 x Ie max. Total Power loss Pv Circuit Breaker at rated load operating temperature [W] 611.5 611.6 916 33 Main Disconnect Switch Application Yes, with cessories Application Conditions For utilization outside North America, assemblies (of products) shall ply to the IEC 61439-1 requirements manual motor starters are intended for use in closed areas without hazardous operating conditions such as dust or explosive or corrosive gases. Enclosures of appropriate manner need to be in ple to protect devices in such environments. Bulletin Motor Protection Circuit Breakers and Motor Circuit Protectors 2-46 .ab./catalogs Prefer availability cat. nos. are bold. Publication A117-CA001A-EN-P ! Specifications cessories for Bulletin Motor Protection Circuit Breakers General Data, Continued Auxiliary Contt Blocks for Front Mounting -C-AFA, -C-AFAR Auxiliary Contt Blocks for Right-Side Mounting -C-ASA, -C-ASAR Rated Thermal Current Ith at 40 °C ambient temperature at 60 °C ambient temperature Contt Class Coordination cording to NEMA (UL/CSA Standards) Terminal Parts Type of terminals Screwdriver Pozidriv No. 2/Blade No. Bulletin Motor Protection Circuit Breakers and Motor Circuit Protectors 2-47 .ab./catalogs Prefer availability cat. nos. are bold. Publication A117-CA001A-EN-P ! Specifications Undervoltage Trip for Left-Side Mounting -C-UX Undervoltage Trip with 2 Auxiliary Contts for Left-Side Mounting -C-UC Shunt Trip for Left-Side Mounting -C-SN tuating Voltage Pull-in Drop-out 0.851.1 x Us 0.70.35 x Us 0.851.1 x Us 0.70.35 x Us 0.71.1 x Us Rated Control Voltage min. max. 21V 50 Hz, 24V 60 Hz 600V 50 Hz 21V 50 Hz, 24V 60 Hz 600V 50 Hz 21V 50 Hz, 24V 60 Hz 600V 50 Hz On-Time Terminal Parts Type of terminals Screwdriver Pozidriv cessories for Bulletin Motor Protection Circuit Breakers, Continued pt Busbar Feeder Terminal pt Busbar pt Busbar Feeder Block Rated Thermal Current Ith at 60 °C ambient temperature Bulletin Motor Protection Circuit Breakers and Motor Circuit Protectors 2-48 .ab./catalogs Prefer availability cat. nos. are bold. Publication A117-CA001A-EN-P ! Specifications Weights Bulletin Motor Protection Circuit Breakers and Motor Circuit Protectors 2-49 .ab./catalogs Prefer availability cat. nos. are bold. Publication A117-CA001A-EN-P ! Specifications 140-CT Trip Contt Block for Flush Mounting on Circuit Breakers Undervoltage Trip and Shunt Trip for Flush Mounting on Circuit Breakers Rated Thermal Current Ith up to 40 °C ambient temperature up to 60 °C ambient temperature Undervoltage Trip Unit for Right-Side Mounting on Circuit Breakers Shunt Trip for Flush Mounting on Circuit Breakers Operating Voltage Pick-up Coil Performance Pick-up Drop-out Terminals Terminal type Fine-stranded Tightening torque Coarse-stranded Tightening torque Bulletin Motor Protection Circuit Breakers and Motor Circuit Protectors 2-50 .ab./catalogs Prefer availability cat. nos. are bold. Publication A117-CA001A-EN-P !
