EMERSON KJ3241X1-EA1冗余串行接口接線端子
I2C接口路由至P2連接器，以訪問位于轉換模塊上的串行EEPROM。用戶可使用配置開關選擇轉換模塊串行EEPROM的設備地址。有關開關的信息，請參閱第5章，轉換模塊。有關編程信息，請參閱MVME7100單板計算機程序員參考。系統內存MC864xD包括兩個內存控制器。MVME7100在每個控制器上支持一組存儲器。MVME7100支持512MB、1GB和2GB DDR2 SDRAMS。這提供了1GB、2GB和4GB的內存配置。MVME7100支持高達DDR533的內存速度。4.6 MVME7100的定時器計時功能由集成在MC864xD中的四個全局高分辨率定時器以及四個額外的獨立32位定時器提供。四個集成32位計時器由RTC輸入計時，RTC輸入由1MHz時鐘驅動。有關更多詳細信息和/或編程信息，請參閱第117頁附錄B“相關文件和制造商文件”中列出的MC864xD參考手冊
The I2C interface is routed to the P2 connector for access to the serial EEPROM located on the transition module. The device address for the transition module serial EEPROM is user selectable using the configuration switches. Refer to Chapter 5, Transition Module for information on the switches. For programming information, see the MVME7100 Single Board Computer Programmer’s Reference.System Memory The MC864xD includes two memory controllers. The MVME7100 supports one bank of memory on each controller. The MVME7100 supports 512MB, 1GB and 2GB DDR2 SDRAMS. This provides memory configurations of 1GB, 2GB, and 4GB. The MVME7100 supports memory speeds up to DDR533. 4.6 Timers Timing functions for the MVME7100 are provided by four global high-resolution timers integrated into the MC864xD plus four additional independent 32-bit timers. The four integrated 32-bit timers are clocked by the RTC input which is driven by a 1MHz clock. Refer to the MC864xD reference manual, listed in Appendix B, Related Documentation and Manufacturers’ Documents on page 117 for additional details and/or programming information
