EMERSON KJ3004X1-EA1現場總線接線板
默認VME設置出廠時，MVME7100具有通過Tsi148 VME控制器的全局環境變量（GEV）編程的以下VME配置。固件允許更改某些VME設置，以便用戶自定義環境。以下是用戶可更改的默認VME設置的說明。有關更多信息，請參閱附錄B“相關文檔”中列出的MOTLoad用戶手冊和Tundra的Tsi148用戶手冊。MVME7100>vmeCfg-s-m顯示選定的默認VME設置-解釋如下：VME PCI主設備啟用[Y/N]=Y MVME7100>PCI主設備已啟用。MVME7100>vmeCfg-s-r234顯示選定的默認VME設置-解釋如下：VMEbus主控制寄存器=0000000 3 MVME7100>VMEbus主機控制寄存器設置為默認（重置）狀態。MVME7100>vmeCfg-s-r238顯示所選的默認VME設置-解釋如下：VMEbus控制寄存器=00000000 8 MVME7100
Default VME Settings
As shipped from the factory, the MVME7100 has the following VME configuration
programmed via Global Environment Variables (GEVs) for the Tsi148 VME controller. The
firmware allows certain VME settings to be changed in order for the user to customize the
environment. The following is a description of the default VME settings that are changeable
by the user. For more information, refer to the MOTLoad User’s Manual and Tundra’s
Tsi148 User Manual, listed in Appendix B, Related Documentation .
MVME7100> vmeCfg -s -m
Displaying the selected Default VME Setting
- interpreted as follows:
VME PCI Master Enable [Y/N] = Y MVME7100>
The PCI Master is enabled.
MVME7100> vmeCfg -s -r234
Displaying the selected Default VME Setting
- interpreted as follows:
VMEbus Master Control Register = 00000003
MVME7100>
The VMEbus Master Control Register is set to the default
(RESET) condition.
MVME7100> vmeCfg -s -r238
Displaying the selected Default VME Setting
- interpreted as follows:
VMEbus Control Register = 00000008
MVME7100
