EMERSON VE4002S2T2控制器端子
附錄C-Phoenix BIOS描述了與Phoenix（系統）BIOS相關的菜單和選項。附錄D-LANWorks BIOS描述了與LANWorks BIOS相關的菜單和選項。附錄E-示例C軟件提供了與VMIVME-7750一起使用的示例代碼。安全摘要在本產品的操作、維護和維修的所有階段，必須遵守以下一般安全預防措施。不遵守這些預防措施或本手冊其他地方的特定警告違反了本產品設計、制造和預期用途的安全標準。VMIC對客戶未能遵守這些要求不承擔任何責任。將系統接地為了將電擊危險降至最低，機箱和系統機柜必須連接到電氣接地。應使用三芯交流電源電纜。電源線必須插入經批準的三觸點電源插座，或與三觸點對兩觸點適配器一起使用，接地線（綠色）牢固連接到電源插座的電氣接地（安全接地）。
Appendix C - Phoenix BIOS describes the menus and options associated with the
Phoenix (system) BIOS.
Appendix D - LANWorks BIOS describes the menus and options associated with the
LANWorks BIOS.
Appendix E - Sample C Software provides example code to use with the
VMIVME-7750.Safety Summary
The following general safety precautions must be observed during all phases of the
operation, service and repair of this product. Failure to comply with these precautions
or with specific warnings elsewhere in this manual violates safety standards of
design, manufacture and intended use of this product.
VMIC assumes no liability for the customer’s failure to comply with these
requirements.
Ground the System
To minimize shock hazard, the chassis and system cabinet must be connected to an
electrical ground. A three-conductor AC power cable should be used. The power
cable must either be plugged into an approved three-contact electrical outlet or used
with a three-contact to two-contact adapter with the grounding wire (green) firmly
connected to an electrical ground (safety ground) at the power outlet.
