EMERSON 1C31177G03環路接口
請注意，單個位置有許多可能的段：偏移地址。上面的公式將提供一個唯一的段：通過將段強制到64 KB的偶數邊界，例如$C00、$E000等，來提供偏移地址。使用此公式時，請確保正確舍入偏移計算！簡介本章介紹VMIVME-7750的硬件跳線設置、連接器說明、安裝、系統設置和操作。開箱程序應遵守運輸集裝箱中的任何預防措施。所有物品應仔細開箱，并徹底檢查運輸過程中可能發生的損壞。應檢查電路板是否有損壞的組件、損壞的印刷電路板、熱損壞和其他可見污染。所有因運輸損壞引起的索賠都應提交給承運人，并向VMIC客戶服務部發送一份完整的報告，以及一份關于損壞物品處理的建議請求。
Note that there are many possible segment:offset addresses for a single location. The
formula above will provide a unique segment:offset address by forcing the segment to
an even 64 Kbyte boundary, for example, $C000, $E000, etc. When using this formula,
make sure to round the offset calculation properly!Introduction
This chapter describes the hardware jumper settings, connector descriptions,
installation, system setup and operation of the VMIVME-7750.
Unpacking Procedures
Any precautions found in the shipping container should be observed. All items
should be carefully unpacked and thoroughly inspected for damage that might have
occurred during shipment. The board(s) should be checked for broken components,
damaged printed circuit board(s), heat damage and other visible contamination. All
claims arising from shipping damage should be filed with the carrier and a complete
report sent to VMIC Customer Service along with a request for advice concerning the
disposition of the damaged item(s).
