EMERSON 1C31174G03工控備件
警告：VMIC產品上組裝的一些組件可能對靜電放電敏感，并且在受到高能靜電場影響的電路板上可能會發(fā)生損壞。當電路板放置在工作臺上進行配置等時，建議在電路板下方插入導電材料以提供導電分流器。未使用的電路板應存儲在裝運時的相同保護盒中。硬件設置VMIVME-7750在工廠中填充了用戶指定的選項，作為VMIVME-7720訂購信息的一部分。CPU速度、RAM大小和閃存大小不可由用戶升級。要更改CPU速度或RAM/Flash大小，請聯(lián)系客戶服務以獲得退貨授權（RMA）。VMIVME-7750已測試系統(tǒng)操作，并隨工廠安裝的收割臺跳線一起裝運。單板CPU跳線和連接器的物理位置如第27頁圖1-1所示。CPU板跳線和連接器的定義見表1-1至表1-7。注意：用戶可能會更改或修改下表中標記為“用戶可配置”的所有跳線。用戶不得修改標記為出廠配置的所有跳線。
CAUTION: Some of the components assembled on VMIC’s products may be sensitive
to electrostatic discharge and damage may occur on boards that are subjected to a
high energy electrostatic field. When the board is placed on a bench for configuring,
etc., it is suggested that conductive material be inserted under the board to provide a
conductive shunt. Unused boards should be stored in the same protective boxes in
which they were shipped.Hardware Setup
The VMIVME-7750 is factory populated with user-specified options as part of the
VMIVME-7750 ordering information. The CPU speed, RAM size and flash memory
size are not user-upgradable. To change CPU speeds or RAM/Flash size, contact
customer service to receive a Return Material Authorization (RMA).The VMIVME-7750 is tested for system operation and shipped with factory-installed
header jumpers. The physical location of the jumpers and connectors for the single
board CPU are illustrated in Figure 1-1 on page 27. The definitions of the CPU board
jumpers and connectors are included in Table 1-1 through Table 1-7.
CAUTION: All jumpers marked User Configurable in the following tables may be
changed or modified by the user. All jumpers marked factory configured should not
be modified by the user.
