FOXBORO E69F-BI2壓力變送器
在NMI中斷例程處理中斷后，軟件通過將相應的啟用/禁用位設置為1來清除NMI狀態位。NMI啟用和實時時鐘寄存器可以屏蔽NMI信號并禁用/啟用所有NMI源。集成外圍設備VMIVME-7750包含國家半導體超級I/O（SIO）芯片。SIO為VMIVME-7750提供標準軟盤驅動器控制器、兩個16550 UART兼容串行端口、鍵盤和鼠標端口以及用于系統監控功能的通用I/O。兩個串行端口信號均可從前面板獲得。軟盤信號可通過VME背板連接器獲得，并可通過適當?shù)霓D(zhuǎn)換實用程序板（VMIACC-0562）訪問。IDE接口由Intel I/O控制器集線器（ICH2）芯片提供。IDE接口支持兩個通道，即主通道和輔助通道。輔助通道在板上路由到可選的小型閃存插座。主通道從VME背板引出至VMIACC-0562過渡實用板，該板終止于標準的40針插頭。該通道可以支持兩個驅動器，一個主驅動器和一個從驅動器。
After the NMI interrupt routine processes the interrupt, software clears
the NMI status bits by setting the corresponding enable/disable bit to 1. The NMI
Enable and Real-Time Clock register can mask the NMI signal and disable/enable all
NMI sources.ntegrated Peripherals
The VMIVME-7750 incorporates a National Semiconductor Super I/O (SIO) chip.
The SIO provides the VMIVME-7750 with a standard floppy drive controller, two
16550 UART-compatible serial ports, keyboard and mouse ports and general purpose
I/O for system monitoring functions. Both serial port signals are available from the
front panel. The floppy signals are available via the VME backplane connectors and
can be accessed with the appropriate transition utility board (VMIACC-0562).
The IDE interface is provided by the Intel I/O Controller Hub (ICH2) chip. The IDE
interface supports two channels known as the primary and secondary channels. The
secondary channel is routed on-board to the optional compact flash socket. The
primary channel is routed out the VME backplane to a VMIACC-0562 transition
utility board which terminates into a standard 40-pin header. This channel can
support two drives, a master and slave.
