EMERSON KJ3001X1-BA1控制主板卡件
下一個邏輯分區將從第一個硬盤驅動器開始分配驅動器號，依次為每個邏輯設備刻字，直到所有邏輯分區都分配了驅動器號。然后，系統將對第二個硬盤上的每個邏輯分區執行相同的順序刻字。注意：添加額外驅動器或更改初始分區方案導致的驅動器號更改可能會導致更改之前安裝的操作系統出現問題。在安裝操作系統之前規劃您的配置，以最大限度地減少遠程以太網引導的困難VMIVME-7750能夠通過使用Lanworks BootWare BIOS的網絡使用LAN1或LAN2從服務器啟動。BootWare BIOS使您能夠使用各種網絡協議遠程啟動VMIVME-7750。以太網必須通過LAN前面板（RJ-45）連接器連接才能遠程啟動。
The next logical partitions will be assigned drive
letters starting on the first hard drive, lettering each logical device sequentially, until
all are assigned a drive letter. The system will then perform the same sequential
lettering of each logical partition on the second hard disk.
NOTE: Drive letter changes caused by adding an additional drive or changing the
initial partitioning scheme may cause difficulties with an operating system installed
prior to the changes. Plan your configuration prior to installing the operating system
to minimize difficulties Remote Ethernet Booting
The VMIVME-7750 is capable of booting from a server using either LAN1 or LAN2
over a network utilizing Lanworks BootWare BIOS. The BootWare BIOS gives you the
ability to remotely boot the VMIVME-7750 using a variety of network protocols. The
Ethernet must be connected through either LAN front panel (RJ-45) connector to boot
remotely.
