EMERSON KJ3006X1-BA1脈沖多功能輸入/輸出卡
如果未禁用傳統USB支持，Windows 98SE/2000將嘗試為此時不存在的設備（USB）加載設備驅動程序。有關更改BIOS設置的指南，請參閱第87頁的“BIOS設置”。對于這種情況，建議的解決方法是連接PS/2鍵盤和鼠標，在BIOS中禁用“傳統USB支持”并啟用“將中斷分配給USB”，然后安裝Windows 98SE/2000。安裝完成后，將PS/2鍵盤和鼠標更換為USB鍵盤和鼠標，并在BIOS中啟用“傳統USB支持”。這種方法可能更容易，因為您不必擔心在正確的時間對BIOS進行更改。Windows NT 4.0在不支持USB設備的操作系統中使用USB鍵盤/鼠標需要更改默認的BIOS設置。
If Legacy
USB Support is not disabled, Windows 98SE/2000 will attempt to load a device driver
for a device (USB) that is not present at that point. See “BIOS Setup” on page 87 for
guidelines on changing BIOS settings.
A suggested workaround to this situation is to connect a PS/2 keyboard and mouse,
disable ‘Legacy USB Support’ and enable ‘Assign Interrupt to USB’ in the BIOS, and
install Windows 98SE/2000. At some point after the installation is complete, replace
the PS/2 keyboard and mouse with a USB keyboard and mouse and enable ‘Legacy
USB Support’ in the BIOS. This approach might be easier since you don’t have to
worry about making changes to the BIOS at exactly the right time.Windows NT 4.0
The use of a USB keyboard/mouse with an operating system that does not support
USB devices requires changing the default BIOS settings.
