TRICONEX 3501TN2模擬量模塊
本地網絡連接您可以將PC連接到控制器所連接的同一以太網網絡。當PC和控制器正確連接到同一子網時，RobotStudio將自動檢測控制器。電腦的網絡設置取決于網絡配置。要設置電腦，請與網絡管理員聯系。服務端口連接連接到控制器的服務端口時，您可以自動獲取PC的IP地址，也可以指定固定的IP地址。如果您不確定如何設置服務端口連接，請與網絡管理員聯系。自動IP地址控制器的服務端口有一個DHCP服務器，如果配置了該服務器，該服務器將自動為您的電腦提供IP地址。有關詳細信息，請參閱有關配置TCP/IP的Windows幫助。固定IP地址您也可以在連接到控制器的PC上指定固定IP地址，而不是自動獲取IP地址
Local network connection
You can connect your PC to the same Ethernet network that the controller is connected to.
When the PC and the controller are connected correctly and to the same subnet, the controller
will be automatically detected by RobotStudio.
The network settings for the PC depend on the network configuration. For setting up the PC,
contact the network administrator.
Service port connection
When connecting to the controller's service port, you can either obtain an IP address for the
PC automatically, or you can specify a fixed IP address.
If you are not sure how to set up the service port connection, contact the network
administrator.
Automatic IP address
The controller's service port has a DHCP server that will automatically give your PC an IP
address if it is configured for this. For detailed information see Windows help on configuring
TCP/IP.
Fixed IP address
Instead of obtaining an IP address automatically, you can also specify a fixed IP address on
the PC you connect to the controller
