TRICONEX 3603B數字輸出模塊
TRICONEX 3603B表達式由數字文字（包括PI）、括號、數學運算符+、-、*、/、^（冪）和數學函數sin、cos、sqrt、atan、abs組成。任何其他字符串都被解釋為變量，這些變量被添加為附加的財產。結果顯示在結果中。表達式由數字文字（包括PI）、括號、數學運算符+、-、*、/、^（冪）和數學函數sin、cos、sqrt、atan、abs組成。任何其他字符串都被解釋為變量，這些變量被添加為附加的財產。TRICONEX 3603B結果顯示在result.Count脈沖輸出次數中。信號描述執行設置為高（1）以脈沖輸出計數次數。輸出輸出脈沖.StartTime指定第一個脈沖之前經過的時間。間隔指定脈沖之間的模擬時間。Repeat（重復）指定信號應重復脈沖還是僅脈沖一次。當前時間指定當前模擬時間。信號描述激活設置為True以激活計時器，設置為False以停用計時器。輸出以指定的時間間隔發送脈沖。TRICONEX 3603B
TRICONEX 3603B
opWatch The StopWatch measures time during simulation (TotalTime). A new lap can be started by triggering the Lap input signal. LapTime shows the current lap time. The time is only measured when Active is set to 1. The times are reset when the input signal Reset is set. Parametric Primitives ParametricBox The ParametricBox generates a box with dimensions specified by length, width, and height. ParametricCircle The ParametricCircle generates a circle with a given radius. Properties Description TotalTime Specifies the accumulated time. LapTime Specifies the current lap time. AutoReset If true, TotalTime and LapTime will be set to 0 when the simulation starts. Signals Description Active Set to True to activate the stop watch, and False to deactivate it. Reset Resets Total time and Lap time when set to high. Lap Starts a new lap.zeX Specifies the length of the box in the X-axis direction. SizeY Specifies the length of the box in the Y-axis direction. SizeZ Specifies the length of the box in the Z-axis direction GeneratedPart Specifies the generated part. KeepGeometry False to remove the geometry data from the generated part. This can make other components such as Source execute faster. Signals Description Update Set to high (1) to update the generated part.TRICONEX 3603B
公司主營優勢
應用行業
