BENTLY 3500/15 106M1081-01電源輸入模塊
BENTLY 3500/15 106M1081-01電源輸入模塊中文資料：
BENTLY 3500/15 106M1081-01電源輸入模塊19英寸機架式PLC基板應根據“基板安全接地”章節中的指南進行接地，如上圖所示（圖2-11），使用與PLC基板分開的接地線。?如果使用嵌入式安裝適配器支架（IC693ACC313），可以如圖2-11所示安裝接地線，并將接地線連接到嵌入式安裝適配器托架。應安裝一條額外的接地線，將適配器支架連接到19“機架上的堅實底盤接地。使用與圖2-11所示相同或等效的五金件和油漆清除方案。?如果使用表面安裝適配器支架（IC693ACC308），BENTLY 3500/15 106M1081-01接地線應如圖2-11所示從底板延伸至19“機架上的堅實底盤接地。使用與圖2-11所示相同或等效的五金件和油漆清除方案。編程器接地為了正常運行，運行PLC軟件的計算機（編程器）必須具有與CPU基板共用的接地連接。通常，通過確保編程器的電源線連接到與基板相同的電源（具有相同的接地參考點）來提供這種公共接地連接。BENTLY 3500/15 106M1081-01
英文資料
Nineteen-Inch Rack-mounted PLC baseplates should be grounded according to the guidelines in the “Baseplate Safety Grounding” section, using a separate ground wire from the PLC baseplate as shown in the previous figure (Fig. 2-11). ? If using the Recessed Mount Adapter Bracket (IC693ACC313), the ground wire can be installed as shown in Figure 2-11 with the ground attached to the Recessed Mount Adapter Bracket. An additional ground wire connecting the Adapter Bracket to a solid chassis ground on the 19” Rack should be installed. Use the same or equivalent hardware and paint removal scheme as shown in Figure 2-11. ? If using the Surface Mount Adapter Bracket (IC693ACC308), the ground wire should be run from the baseplate as shown in Figure 2-11, to a solid chassis ground on the 19” Rack. Use the same or equivalent hardware and paint removal scheme as shown in Figure 2-11. Programmer Grounding For proper operation, the computer (programmer) running the PLC software must have a ground connection in common with the CPU baseplate. Normally, this common ground connection is provided by ensuring that the programmer’s power cord is connected to the same power source (with the same ground reference point) as the baseplate.BENTLY 3500/15 106M1081-01
每 日 展 示
公 司 主 營 優 勢
應 用 行 業
