NI PXIe-8105嵌入式控制器
品牌：NI
型號：NI PXIe-8105
產(chǎn)品說明：嵌入式控制器
NI PXIe-8105嵌入式控制器中文資料：
NI PXIe-8105嵌入式控制器到背板的輸出電壓連接（所有電源）下圖說明了這三個輸出電壓如何在內部連接到基板上的背板。安裝在基板上的模塊所需的電壓和功率通過基板連接器過電流保護（所有電源）提供。5V邏輯輸出電子限制為3.5安培（高容量電源為7安培）。內部檢測到過載（包括短路），NI PXIe-8105導致電源關閉。電源將持續(xù)嘗試重新啟動，直到過載消除。輸入線路中的內部保險絲作為備用。電源通常會在保險絲熔斷之前關閉。保險絲還可防止內部電源故障。時序圖下面的時序圖顯示了DC輸入到DC輸出以及電源生成的電源OK信號（PSOK）的關系NI PXIe-8105
英文資料
Output Voltage Connections to Backplane (All Supplies) The following figure illustrates how these three output voltages are connected internally to the backplane on the baseplate. The voltage and power required by modules installed on the baseplate is supplied through the baseplate connectors Overcurrent Protection (all Supplies) The 5V logic output is electronically limited to 3.5 amps (7 amps for high capacity supplies). An overload (including short circuits) is sensed internally and causes the supply to shut down. The supply will continually try to restart until the overload is removed. An internal fuse in the input line is provided as a backup. The supply will usually shut down before the fuse blows. The fuse also protects against internal supply faults. Timing Diagram The timing diagram below shows the relationship of the DC input to the DC outputs and to the Power Supply OK signal (PSOK) generated by the power supplyNI PXIe-8105
每 日 展 示
公 司 主 營 優(yōu) 勢
應 用 行 業(yè)
