DEIF GPU-3并聯與保護裝置
1.產 品 介 紹
品牌：DEIF
型號：DEIF GPU-3
產品說明：并聯與保護裝置
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
DEIF GPU-3并聯與保護裝置狀態燈SLP模塊上有三個狀態LED。DEIF GPU-3頂部LED（參見上圖）指示模塊的狀態。當模塊啟動時，它將閃爍ON和OFF，然后在正常操作期間保持ON。DEIF GPU-3底部的兩個LED燈未被使用，且始終處于關閉狀態。操作按鈕前，請參閱下面的注意事項。提供一個按鈕。如果用戶應用程序在加電時被配置為“自動運行”，按下并按住按鈕不到5秒將簡單地重新啟動該程序。按住5秒鐘以上將重新初始化模塊，并要求重新加載用戶應用程序。警告：按住按鈕超過5秒將重新初始化模塊，并要求重新加載用戶應用程序。DEIF GPU-3
Status Light Three Status LEDs exist on the SLP module. The top LED (see figure above) indicates the condition of the module. It will blink ON and OFF while the module is booting up,DEIF GPU-3 then will stay ON during normal operation. The bottom two LEDs are not used and will always be off. Pushbutton See Caution note below before operating the pushbutton. One pushbutton is provided. Pushing and holding the pushbutton for less than 5 seconds will simply restart the user application program if it was configured to DEIF GPU-3“auto-run” at power up. Pushing and holding for more than 5 seconds will reinitialize the module and require that the user application program be reloaded. Caution Pushing and holding the pushbutton for more than 5 seconds will reinitialize the module and require that the user application program be reloaded.DEIF GPU-3
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
