PROSOFT MVI56-101M通信模塊
1.產 品 介 紹
品牌：PROSOFT
型號：PROSOFT MVI56-101M
產品說明：通信模塊
優勢：供應進口原裝正品，專業停產配件。
2.產 品 詳 情 資 料：
對多點系統上的每個PLC重復上述步驟。如果為模塊分配SNP ID，則必須使用適當?shù)能浖?。有關說明，請參閱模塊的用戶手冊。將Logicmaster編程器連接到多點系統上的PLC?將編程器與多點系統的編程器相連。PROSOFT MVI56-101M從Logicmaster主菜單中選擇F2，PROSOFT MVI56-101M“Logicmaster 90 Configuration Package”。\374；選擇F7，“Programmer Mode and Setup”。\374；選擇F3，“select PLC Connections”。在SELECTED SNP ID字段中，輸入要與之通信的PLC或設備的SNP ID。?在端口連接字段中，選擇MULTIDROP。PROSOFT MVI56-101M按F6，“設置”，連接到所選PLC。您應該在幾秒鐘內連接到選定的PLC。如果您無法連接，請參閱下一節。NP多點故障排除如果您在多點系統上連接到PLC或模塊時遇到問題，請檢查以下內容：PROSOFT MVI56-101M是所有PLC都有問題，還是只有一個PLC有問題？嘗試通過多點系統連接到其他PLC。如果無法連接到任何設備，請檢查常見問題，如電纜故障。如果可以連接到除一個PLC之外的所有PLC，請使用下一段中描述的直接連接方法。
Repeat the above steps for each PLC that is on the multidrop system. If assigning an SNP ID to a module, you must use the appropriate software. See the user’s manual for the module for instructions.Connecting your Logicmaster Programmer to a PLC on a Multidrop SystemPROSOFT MVI56-101M Connect your programmer to the programmer connection for the multidrop system.PROSOFT MVI56-101M From the Logicmaster Main Menu, select F2, “Logicmaster 90 Configuration Package.”PROSOFT MVI56-101M Select F7, “Programmer Mode and Setup.”PROSOFT MVI56-101M Select F3, “Select PLC Connections.”PROSOFT MVI56-101M In the SELECTED SNP ID field, enter the SNP ID of the PLC or device you wish to communicate with.PROSOFT MVI56-101M In the PORT CONNECTION field, select MULTIDROP.PROSOFT MVI56-101M Press F6, “setup,” to connect to the selected PLC. You should connect to the selected PLC within a few seconds. If you cannot connect, see the next section.SNP Multidrop Troubleshooting If you are having trouble connecting to a PLC or module over the multidrop system, check the following:Is there a problem with all PLCs or only one? Try connecting to other PLCs over the multidrop system. If you cannot connect to any, check for a common problem such as a defective cable. If you can connect to all but one PLC, use the direct connection method described in the next paragraph.
3.產 品 展 示
4.公 司 優 勢
5.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
