RELIANCE O-57C406-E遠程頭I/O
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE O-57C406-E遠程頭I/O
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE O-57C406-EL-只能在系統內的一個點接地。通常L-直接接地在電源后面（例如在母線上）。接地應易于接近和斷開。接地電阻必須≤2歐姆。根據歐洲理事會指南89/336/EWG（也適用于德意志聯邦共和國的EMC法律）的要求，自1996年1月1日起，所有電氣設備必須在歐盟內提供與電磁兼容性（EMC）相關的CE符號。RELIANCE O-57C406-E系統H41q/H51q系列的所有模塊均帶有CE符號。為了防止在機柜和框架中安裝控制裝置（PLC）時出現EMC問題，需要采取以下措施：-將H 7013 HIMA模塊安裝為直接在24 V直流饋電上的電源濾波器。如果使用帶有CE符號的電源，例如HIMA標準電源600S24和1200S24，則不需要過濾器。RELIANCE O-57C406-E
L- may only be earthed at one point within the system. Generally L- is earthed directly behind the power supply (e. g. on the bus bar). The earthing should be easy to access and disconnect. The earthing resistance must be ≤ 2 Ohm.Measures to Install a Cabinet According to the Requirements According to the guidline 89/336/EWG of the European Council (also law for EMC in the Federal Republic of Germany), since January, 1st 1996 all electrical equipments have to be provide with the CE symbol in relation of Electromagnetic Compatibility (EMC) within the European Union. All modules of the RELIANCE O-57C406-Esystem families H41q/H51q are supplied with the CE symbol. To prevent also EMC problems with the installation of controls (PLCs) in cabinets and frames, the following measures are required: – Installation of the H 7013 HIMA module as power supply filtre directly on the 24 V DC feeding. The filtre is not required if power supplies with the CE symbol are used e. g. the HIMA standard power supplies 600S24 and 1200S24.RELIANCE O-57C406-E
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.關 于 相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
