RELIANCE 30V4160工控控制卡件
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 30V4160工控控制卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE 30V4160磨損僅發生在負載較重的繼電器輸出和/或使用繼電器輸出模塊時經常切換的繼電器輸出中。當發生此類磨損時，應將其完全更換，作為預防措施。我們建議每5年更換一次電源內的電解電容器。8.8.1更換緩沖電池的程序鋰電池用于緩沖RAM。我們建議大約每2.5年更換一次這些電池。電源監控模塊RELIANCE 30V4160：電池：CR-1/2 AA-CB，RELIANCE 30V4160零件號440000016該模塊可在電壓下拉出。然后，系統警報將被釋放，中央模塊的顯示屏上出現消息BATE（外部緩沖電池故障）。然后拆下電池（第一個正極，然后是負極）。在焊接新電池時，應注意正確的極化，首先焊接負極，然后焊接正極。中央模塊：RELIANCE 30V4160零件號440000018模塊可能在電壓不足時被拉出。對于單通道系統，這會導致設備關閉，在冗余系統中，如果拉出中央模塊，系統反應取決于配置。RELIANCE 30V4160
Wear can only occur in relay outputs with heavy loads and/or those which are often switched if relay output modules are used. When wear of this kind occurs they should be completely replaced as a preventive measure. We recommended exchanging electrolytic capacitors within the power supply every 5 years. 8.8.1 Procedure to Exchange the Buffering Batteries Lithium btteries are used to buffer the RAMs. We recommend exchanging of these batteries approx. every 2,5 years. Power supply monitoring module RELIANCE 30V4160: Battery: CR-1/2 AA-CB, HIMA-Part no. 440000016 The module can be pulled out under voltage. Then a system alarm will be released and on the display of the central module the message BATE (fault external buffering battery) occurs. Then unsolder batteries (1st + pole, then - pole). With soldering of the new batteries regard for correct polarization and solder at first the - pole and then the + pole. Central module: RELIANCE 30V4160, HIMA-part no. 440000018 The module may be pulled out under voltage. With single channel systems this results in a shut down of the plant, in redundant systems the system reaction if a central module is pulled out depends on the configuration.RELIANCE 30V4160
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
