RELIANCE 57C440以太網接口模塊
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 57C440以太網接口模塊
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE 57C440顯示了控制器上開關、跳線頭、連接器和指示燈的位置?？刂破饕堰M行出廠測試，出廠時帶有以下章節所述的默認出廠跳線設置?？刂破魇褂盟璧墓S安裝調試監視器RELIANCE 57C440Bug（162Bug）以及這些工廠跳線設置進行操作。下表列出了手動可配置項目。系統控制器選擇標題（J1）RELIANCE 57C440嵌入式控制器在工廠通過跨J1引腳1和2的跳線配置為VMEbus系統控制器。如果通過將跳線移動到J1針腳2和3來選擇“自動”系統控制器功能，則控制器將根據其在總線上的位置來確定其是否為系統控制器。如果板位于從左起的第一個插槽中，則將其自身配置為“系統控制器”。如果RELIANCE 57C440在任何情況下都不能充當系統控制器，請從J1上拆下跳線。當控制器用作系統控制器時，SCON LED亮起。RELIANCE 57C440
shows the locations of the switches, jumper headers, connectors, and LEDs on the controller. The controller has been factory tested and is shipped with the default factory jumper settings described in the following sections. The controller operates with its required and factory-installed debug monitor, MVME162Bug (162Bug), with these factory jumper settings. Manually configurable items are listed in the following table.System Controller Select Header (J1) The RELIANCE 57C440 Embedded Controller is factory-configured as a VMEbus system controller by a jumper across J1 pins 1 and 2. If you select the “automatic’’ system controller function by moving the jumper to J1 pins 2 and 3, the controller determines whether it is the system controller by its position on the bus. If the board is in the first slot from the left, it configures itself as the “system controller”. If the RELIANCE 57C440 is not to act as the system controller under any circumstances, remove the jumper from J1. When the controller is functioning as system controller, the SCON LED is turned on.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
