RELIANCE 0-52850印刷電路板
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 0-52850印刷電路板
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE 0-52850串行端口1/控制臺的同步時鐘選擇標頭（J11）MVME162FX嵌入式控制器出廠時，串行端口1/Console標頭配置為異步通信（已移除跳線）。為選擇串行端口1/CONSOLE連接的同步通信，在串行端口2的引腳1和2以及引腳3和4時鐘選擇頭（J12）之間安裝跳線。RELIANCE 0-52850嵌入式控制器出廠時，串行端口2頭配置為異步通信（即，拆除跳線）。要選擇串行端口2連接的同步通信，請在引腳1和2以及引腳3和4之間安裝跳線。如果將MVME712M與控制器一起使用，請如上所示配置RELIANCE 0-52850。有關更多信息，請參閱第1章中的RELIANCE 0-52850章節。
Synchronous Clock Select Header (J11) for Serial Port 1/Console The RELIANCE 0-52850 Embedded Controller is shipped from the factory with the SERIAL PORT 1/CONSOLE header configured for asynchronous communications (jumpers removed). To select synchronous communications for the SERIAL PORT 1/CONSOLE connection, install jumpers across pins 1 and 2 and pins 3 and 4 Clock Select Header (J12) for Serial Port 2 The MVME162FX Embedded Controller is shipped from the factory with the SERIAL PORT 2 header configured for asynchronous communications (i.e., jumpers removed). To select synchronous communications for the SERIAL PORT 2 connection, install jumpers across pins 1 and 2 and pins 3 and 4. If you are using a RELIANCE 0-52850 with the controller, configure the MVME712M as shown above. Refer to the RELIANCE 0-52850 section in Chapter 1 for additional information.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
