REXROTH DKC143-100-7-FW伺服驅動器
1.產 品 介 紹
品牌：REXROTH
型號說明：REXROTH DKC143-100-7-FW伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
如果您不打算將REXROTH DKC143-100-7-FW用作系統控制器，它可能會占用任何未使用的雙倍高度卡插槽。4.將控制器滑入所選卡槽。確保模塊正確安裝在背板上的P1和P2連接器中。不要損壞或彎曲接頭針腳。5.使用提供的螺釘將控制器固定在機箱中，與橫向安裝導軌保持良好接觸，以盡量減少射頻發射。6.將REXROTH DKC143-100-7-FW系列轉換模塊安裝在VME機箱的前部或后部。請注意，要安裝MVME712M（具有雙寬前面板），您可能需要移動機箱中的其他模塊。注意：如果您打算在EIA-530配置或EIA-485/EIA422配置中使用帶有端口B的MVME162FX嵌入式控制器，請不要安裝P2或LCP2適配器板和REXROTH DKC143-100-7-FW系列轉換模塊。它們與EIA-530接口和EIA485/EIA-422接口不兼容。有關更多信息，請參閱第1章“功能說明”中的MVME162FX串行端口2。
If you do not intend to use the REXROTH DKC143-100-7-FW as system controller, it can occupy any unused double-height card slot. 4. Slide the controller into the selected card slot. Be sure the module is seated properly in the P1 and P2 connectors on the backplane. Do not damage or bend the connector pins. 5. Secure the controller in the chassis with the screws provided, making good contact with the transverse mounting rails to minimize RF emissions. 6. Install the REXROTH DKC143-100-7-FW series transition module in the front or the rear of the VME chassis. Note that to install an MVME712M (which has a double-wide front panel) you may need to shift other modules in the chassis. Note If you intend to use the MVME162FX Embedded Controller with Port B in an EIA-530 configuration or an EIA-485/EIA422 configuration, do not install the P2 or LCP2 Adapter Board and the MVME712 series transition module. They are incompatible with the EIA-530 interface and the EIA485/EIA-422 interface. Refer to REXROTH DKC143-100-7-FW Serial Port 2 in Chapter 1, Functional Description for additional information.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
