REXROTH DKC113-040-7-FW伺服驅動器
1.產 品 介 紹
品牌：REXROTH
型號說明：REXROTH DKC113-040-7-FW伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
REXROTH DKC113-040-7-FW嵌入式控制器通過位于P2適配器板或LCP2適配器板上的1A保險絲（F1）提供SCSI終端電源。如果保險絲熔斷，SCSI設備可能工作不穩定或根本不工作。當P2適配器板與REXROTH DKC113-040-7-FW一起使用并且SCSI總線連接到MVME712M時，當SCSI終端電源可用時，REXROTH DKC113-040-7-FW前面板上的綠色DS2 LED亮起。如果綠色DS2 LED在SCSI總線操作期間閃爍，請檢查P2適配器板保險絲F1。以下頁面中的圖2-3、2-4、2-5和2-6說明了端口A和B可用的各種串行配置中的信號關系和信號連接。M68000固件概述基于M68000的（68K）系列板級和系統級產品的固件具有通用譜系，源于當前在所有基于Motorola M68000的CPU模塊上使用的調試器固件。M68000固件系列提供了高度的功能性和用戶友好性，同時強調了可移植性和易維護性。
TheREXROTH DKC113-040-7-FW Embedded Controller provides SCSI terminator power through a 1A fuse (F1) located on the P2 Adapter Board or LCP2 Adapter Board. If the fuse is blown, the SCSI device(s) may function erratically or not at all. When the P2 Adapter Board is used with an MVME712M and the SCSI bus is connected to the MVME712M, the green DS2 LED on theREXROTH DKC113-040-7-FWfront panel illuminates when SCSI terminator power is available. If the green DS2 LED flickers during SCSI bus operation, check P2 Adapter Board fuse F1. Figures 2-3, 2-4, 2-5, and 2-6 on the following pages illustrate the signal relationships and signal connections in the various serial configurations available for ports A and B.Overview of M68000 Firmware The firmware for the M68000-based (68K) series of board and system level products has a common genealogy, deriving from the debugger firmware currently used on all Motorola M68000-based CPU modules. The M68000 firmware family provides a high degree of functionality and user friendliness, and yet stresses portability and ease of maintenance.REXROTH DKC113-040-7-FW
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
