RELIANCE 0-57408-D控制脈沖卡件
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 0-57408-D控制脈沖卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
RELIANCE 0-57408-DRCU鏈路RCU鏈路電纜在主CPU和備用CPU之間傳輸數據。兩個CPU連接到RCU鏈路電纜。RCU鏈路終端用于單CPU配置的RCU鏈路連接器。通過現場總線連接到控制器的遠程I/O輸入/輸出單元。SELV安全特低電壓（電源）。SIL安全完整性等級10BaseT 10 Mbit以太網，符合IEEE 802.3 100BaseTX 100 Mbit電氣以太網IEEE 802.3歐洲聯盟指令合規性本文件中提到的產品標有標志的裝置符合電磁兼容性指令89/336/EEC和低壓指令73/23/EEC。見附錄D，RELIANCE 0-57408-D指令注意事項。如果產品標有UL標志，則本文件中提到的UL認證單位為UL認證單位。表示美國以及加拿大和美國的UL認證?；諛?biāo)表示僅加拿大的UL認證。應用標準為UL508，工業控制設備。經批準用于危險場所的裝置也符合UL60079-15標準。為了滿足UL對危險場所的要求，必須遵守附錄E“標準”中的說明。RELIANCE 0-57408-D
RCU Link RCU Link Cable transfers data between Primary and Back-up CPU. The two CPUs are connected to the RCU Link Cable. An RCU Link Terminator is used on the RCU Link Connector in single CPU configuration. Remote I/O Input/Output units connected to a controller via a fieldbus. SELV Safety Extra Low Voltage (power supply).RELIANCE 0-57408-DSIL Safety Integrity Level 10BaseT 10 Mbit Ethernet according to IEEE 802.3 100BaseTX 100 Mbit electrical Ethernet IEEE 802.3EUROPEAN UNION DIRECTIVE COMPLIANCE Units mentioned in this document for which the product is marked with the logo comply with the electromagnetic compatibility directive 89/336/EEC and the low-voltage directive 73/23/EEC. See Appendix D, Directive Considerations. UL LISTING Units mentioned in this document are UL listed if the product is marked with the UL logo. indicates UL approval for the USA, and for both Canada and the USA. The logo indicates UL approval for Canada only. The applied standard is UL508, Industrial Control Equipment. Units approved for use at hazardous locations also comply with the standard UL60079-15. To fulfill the UL requirements for hazardous locations, the instructions in Appendix E, Standards must be followed.RELIANCE 0-57408-D
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
