WOODWARD 5466-074工控控制卡件
1.產 品 介 紹
品牌：WOODWARD
型號說明：WOODWARD 5466-074工控控制卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
WOODWARD 5466-074不允許在帶電運行的系統中操縱CEX總線底板。在更換或拆除基板之前，必須拆除該段上的所有CEX模塊。使用以下步驟安裝基板，包括單元：1。將鎖定裝置旋轉至打開位置（1），將裝置底板后部的上鉤牢固地鉤住DIN導軌的上邊緣，WOODWARD 5466-074然后輕輕地將底板完全卡入安裝位置。2.將鎖定裝置旋轉到滑動位置（2），沿DIN導軌將裝置滑動到所需的安裝位置，并使用連接器插頭和插座將其輕輕地連接到相鄰的裝置基板上。為防止損壞銷，確保裝置互連時基板插頭和插座完全對齊。在任何情況下都不要過度用力！互連完成后，順時針旋轉鎖定裝置至鎖定位置（3）。基板現在已完全鎖定到位，并與DIN導軌有良好的接地連接。WOODWARD 5466-074
It is not allowed to manipulate CEX bus baseplates in a powered and running system. Before changing or removing a baseplate, all CEX modules on that segment must be removed.Use the following procedure to mount the baseplates, complete with units:WOODWARD 5466-0741. Rotate the locking device to the OPEN position (1), hook the upper hook at the rear of the unit baseplate securely over the upper edge of the DIN-rail and gently snap the baseplate fully into the mounting position. 2. Rotate the locking device to the SLIDE position (2), slide the unit along the DIN-rail to the desired mounting position and using the connector plugs and sockets gently attach it to the adjacent unit baseplate.To prevent damage to the pins, be sure the baseplate plugs and sockets are fully aligned as the units interconnect. Under no circumstances use excessive force!When interconnection is complete, rotate the locking device clockwise to the LOCKED position (3). The baseplate is now fully locked into position and has a good ground connection to the DIN-rail.WOODWARD 5466-074
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
