HONEYWELL CC-PAOX01 51405039-275輸出模塊
1.產 品 介 紹
品牌：HONEYWELL
型號說明：HONEYWELL CC-PAOX01 51405039-275輸出模塊
- 輸入電壓：24VDC ± 15%
- 輸入類型：數字
- 出貨數量：8個
- 輸入電流：最大0.5A
- 輸出成功率：最大5W
- 工作溫度：-40°C 至 +70°C
- 儲存溫度：-40°C至+85°C
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
HONEYWELL CC-PAOX01 51405039-275由于電池是并聯的，因此在使用外部電池時，有必要從PM8xx中取出內部電池，以避免減少可用的內存?zhèn)浞輹r(shí)間。在AC 800M控制器正常通電且內存?zhèn)浞莨δ芤鸭せ睿碆（電池）LED閃爍）之前，請勿連接TK821V020電纜。如果PM8xx處理器單元未連接正常電源，則連接電纜后，CPU內存將立即開始消耗電池電量。HONEYWELL CC-PAOX01 51405039-275安裝階段結束時，務必安裝新的內部或外部電池。由于系統安裝期間經常停電，原始電池被大量使用。安裝SB822可充電外部電池單元使用以下步驟連接可充電外部電池：1。交付時，鋰離子電池組未內部連接。按照包裝盒中的數據和安裝表中的步驟正確連接電池組。2.將SB822可充電外部電池單元安裝在DIN導軌上的適當位置。3.將24V電源連接到包裝箱內的連接器。4.將24V電源連接到電池單元（X3）HONEYWELL CC-PAOX01 51405039-275
Due to the batteries being connected in parallel, it is necessary, when using the external battery, to remove the internal battery from the PM8xx in order to avoid reducing available memory back-up time. Do not connect the TK821V020 cable until the AC 800M Controller has been powered-up normally and the memory back-up function has been activated, that is, the B(attery) LED flashes. If no normal power supply is connected to the PHONEYWELL CC-PAOX01 51405039-275processor unit, the CPU memory will immediately start to consume battery power when the cable is connected. Always install a fresh internal or external battery at the end of the installation phase. The original battery is heavily utilized due to frequent blackouts during system installation.Installing the SB822 Rechargeable External Battery Unit Use the following procedure to connect the rechargeable external battery unit: 1. At delivery the Li-Ion battery package is not connected internally. Follow the steps in the Data and installation sheet, which is enclosed in the packing box, to connect the battery package properly. 2. Mount the SB822 rechargeable external battery unit at a suitable position on the DIN-rail. 3. Connect the 24V supply to the connector enclosed in the packing box. 4. Connect the 24V supply to the battery unit (X3)HONEYWELL CC-PAOX01 51405039-275
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
