BENTLY 3500/62-03-00過程變量監測模塊
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/62-03-00過程變量監測模塊
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
BENTLY 3500/62-03-00是一種震動監測模塊，可用于檢測旋轉機械設備的運行狀態。以下是有關該產品的特點介紹、使用方法以及參數規格：
特點介紹：
可以通過模塊進行震動監測，以檢測機械設備的故障和損壞。
支持多種傳感器類型，包括加速度計、速度計和位移傳感器。
提供多個輸入通道，可以同時監測多個設備。
內置報警和故障檢測功能，可以及時發現機械設備的問題。
支持遠程監控和控制，可以通過網絡或其他連接方式訪問模塊。
使用方法：
安裝模塊：將模塊插入到適當?shù)牟宀壑?，并連接傳感器和其他設備。
配置參數：使用軟件配置模塊參數，例如傳感器類型、采樣率、報警和故障設置等。
監測設備：啟動模塊并開始監測機械設備的震動。
分析數據：收集和分析模塊輸出的數據，以確定設備是否存在問題。
參數規格：
輸入通道：最多16個
傳感器類型：加速度計、速度計、位移傳感器等
采樣率：最高20 kHz
動態范圍：±2 g至±50 g（加速度計）、±50 mm/s至±500 mm/s（速度計）
報警和故障：支持多種報警和故障設置，例如超過閾值、失速、軸承故障等。
通訊接口：RS-485、Ethernet等
總之，BENTLY 3500/62-03-00是一種功能強大的震動監測模塊，適用于各種旋轉機械設備的監測和故障診斷。
BENTLY 3500/62-03-00 is a vibration monitoring module that can be used to detect the operating status of rotating machinery. The following are the features, use methods and parameter specifications of the product:
Features:
Vibration monitoring can be carried out through the module to detect the failure and damage of mechanical equipment.
Support a variety of sensor types, including accelerometer, accelerometer and displacement sensor.
Multiple input channels are provided to monitor multiple devices at the same time.
Built-in alarm and fault detection function can timely find problems of mechanical equipment.
It supports remote monitoring and control, and can access the module through network or other connection methods.
usage method:
Install the module: Insert the module into the appropriate slot and connect the sensor and other devices.
Configuration parameters: use software to configure module parameters, such as sensor type, sampling rate, alarm and fault settings.
Monitoring equipment: start the module and start monitoring the vibration of mechanical equipment.
Analyze data: collect and analyze the data output by the module to determine whether the equipment has problems.
Parameter specification:
Input channels: up to 16
Sensor type: accelerometer, accelerometer, displacement sensor, etc
Sampling rate: up to 20 kHz
Dynamic range: ± 2 g to ± 50 g (accelerometer), ± 50 mm/s to ± 500 mm/s (speedometer)
Alarm and fault: support multiple alarm and fault settings, such as exceeding threshold, stalling, bearing fault, etc.
Communication interface: RS-485, Ethernet, etc
In short, BENTLY 3500/62-03-00 is a powerful vibration monitoring module, which is suitable for monitoring and fault diagnosis of various rotating machinery equipment.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
